Part Names and Functions
Rear Panel
fig.9
NORMAL PU MIX Switch
When Master is on, this switch determines whether or not the normal pickup sounds (or the
sounds input to the GUITAR RETURN) are mixed. AC ADAPTOR Jack
By mixing the normal pickup sound, you can create a sound that makes your guitar sound come alive.
GK IN Connector
This connector is for connecting your guitar with a GK cable.
GUITAR OUT Jack
This jack is for connecting an AC adapter (BOSS
Using an AC adapter makes possible long performances with no worry about batteries going dead.
Normal pickup signals input through the
When a cable is connected to this jack, the output of the normal pickup from the OUTPUT jack stops.
GUITAR RETURN Jack
This is an input jack for connecting another effects device, electric guitar, or other instrument.
When connected to this jack, you can use sounds other than the normal pickup when Master is off, and for the Mix sounds when Master is on.
(refer to p.11, 12)
OUTPUT Jack
This jack is for connection to a guitar amp, another effects processor.
*The OUTPUT jack also doubles as the power switch when the unit is running on battery power. The power comes on when a plug is inserted into the INPUT jack, and goes off when it is unplugged. Unplug any connected cords when the unit is not in use.
10