Making the Connections
•To get the best performance from the instrument, set your amp to “Clean” (no distortion).
•When connecting the instrument to a guitar amp, make the necessary adjustments to get the most suitable tone. When recording direct, use this with a COSM amp
•When connecting a GK cable, insert the cable completely until the connector is securely locked. When disconnecting, press the connector’s lock while you detach the cable.
*Always turn the amp volume down completely before connecting and disconnecting cords.
*To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections.
*If there are batteries in the unit while an AC adaptor is being used, normal operation will continue should the line voltage be interrupted (power blackout or power cord disconnection).
Turning On the Power
Be sure to observe the following order when connecting devices and switching on the power to your equipment. By turning on devices in the wrong order, you risk causing malfunction and/ or damage to speakers and other devices.
Connect the
*When the unit is running on battery power, the power comes on when you insert the connector plug into the OUTPUT jack.
*Always make sure to have the volume level turned down before switching on power. Even with the volume all the way down, you may still hear some sound when the power is switched on, but this is normal, and does not indicate a malfunction.
*When operating on battery power only, the unit’s indicator will become dim when battery power gets too low. Replace the battery as soon as possible.
4