Appendix
Lamp (in-series) Wiring for 230V Operation
In prior tests of the 230V version of the 64514 known as the 64516 or 64515, failure of the lamp was common place due to rapid fixture movement during normal operations and penetrating sound waves produced in low frequency based music.
Many customers around the world in places where power is served at 230V or 240V have noticed that connecting the 64514 (120V) lamps in series is the most effective and economical method. Tests have shown that the lamp will hold much longer than their 230V counter parts.
Technical Specifications
WEIGHT & DIMENSIONS |
|
Length | 406 mm (16 in) |
Width | 279 mm (11 in) |
Height | 279 mm (11 in) |
Weight | 5 Kgs (11 lbs) |
Shipping weight | 6.8 Kgs (15 lbs) |
POWER |
|
Switch selectable power | 115V 60Hz or 230V 50Hz |
AC input | |
DUTY CYCLE |
|
1. Fixture ON | (not to exceed) 15 minutes |
2. Fixture OFF | (cool down for) 15 minutes |
LAMPS |
|
115V - 64514 x (2) | 300W 120V |
230V - 64514 x (2) | 300W 120V |
THERMAL | 40° (104° F) |
Maximum ambient temperature | |
FUSE |
|
Main | 20mm Glass 6A 250V Fast Blow |
ORDERING INFORMATION |
|
Cyborg™ | |
Fuse 6A | P170FUSE006 |
Technical Support
Address: | Service Dept. |
|
| 3000 N 29th Ct, Hollywood, FL 33020 (U.S.A.) | |
Support (Email): | tech@chauvetlighting.com | |
Telephone: | (954) | - (Press 4) |
Fax: | (954) | - (Attention: Service) |
Website: | http://www.chauvetlighting.com | |
9 |