4.Using a 5⁄32" drill bit, drill 13⁄4" deep holes straight through the four holes in the back of the body (Figure 13).
Figure 13. Drilling the screw holes.
5.Place the black neckplate setter and the sil- ver neckplate over the holes on the back of the guitar body.
6.Secure the neckplate assembly, the guitar body, and the neck together with the includ- ed 13⁄4" wood screws (Figure 14). DO NOT use glue.
Figure 14. Correctly attached neck.
Pick Guard
To attach the pick guard to the guitar body:
1.Push one white and one black wire through the hole shown in Figure 15.
Figure 15. Pick guard wires.
2.Push the remaining black wire through the hole shown in Figure 16.
Figure 16. Pick guard wire.
|
|
| H3123 Electric Guitar Kit |
|
|
| |
|
| ||
|
|