Philips 608669 manual Brush Maintenance, Quarterly Maintenance Every 250 Hours of Operation

Page 9

OPERATION

FIG. 13

2.Remove exhaust cover and inspect exhaust filter (Figure 14). Replace filter if needed.

FIG. 14

3.Inspect brush bristles for wear. If bristles are worn to 14mm (0.56 in.) or less in length, see Brush Maintenance.

QUARTERLY MAINTENANCE (Every 250 Hours of Operation)

Check motors for carbon brush wear. Replace brushes when worn to a length of 10mm (0.38 in.) or less.

Contact an Authorized Service Center for carbon brush inspection.

FOR SAFETY: When servicing machine, unplug cord from wall outlet.

FOR SAFETY: When servicing machine all repairs must be performed by a qualified service person.

BRUSH MAINTENANCE

If brush bristles are worn to 14mm (0.56 in.) or less, rotate the bearing blocks to extend brush life as follows:

FOR SAFETY: When servicing machine, unplug cord from wall outlet.

1.Remove metal brush shoe from brush base (Philips screwdriver is required).

2.Remove brush assembly. Grip brush on opposite side of belt and pull outward.

3.Inspect drive belt(s) for wear; replace if necessary.

4.Rotate both bearing blocks 180_ and reinstall brush (Figure 15).

NOTE: Brush bearing blocks are labeled with numbers. To extend brush life, position label “2” outwards when reinstalling brush.

2

1

12

FIG. 15

5.Replace metal brush shoe after brush is properly installed.

FOOT LATCH ADJUSTMENT

Foot latch adjustment is required if machine handle doesn’t lock in the upright position and/or brush motor continues to run while in the upright position.

Follow adjusting instructions below:

FOR SAFETY: When servicing machine, unplug cord from wall outlet.

1.Lay vacuum cleaner face down.

2.Loosen foot latch screw,10mm wrench required (Figure 16).

3.Turn adjustment bushing to realign foot latch, 16mm wrench required. Bushing has an off-center hole to allow for foot latch adjustment.

Adjustment

Bushing

Foot Latch

Screw

FIG. 16

4. Retighten foot latch screw.

ViperR Upright Vacuum Cleaner (06 03)

Home Find...

Go To..

9

Image 9
Contents ViperR Machine Data Table of ContentsFor Safety Safety PrecautionsLocated on back side of machine Grounding InstructionsMachine Contents Machine Components Machine InstallationMachine Setup Installing Vacuum HOSE/WANDBrush Height Settings 1-2 Short Carpet Pile Electronic Sensor System Machine OperationMachine Maintenance Weekly Maintenance Every 20 Hours of OperationWand Operation Brush Maintenance Quarterly Maintenance Every 250 Hours of OperationFoot Latch Adjustment Recommended Stock Items Storing MachineProblem Cause Solution Trouble ShootingSpecifications Model120V Indice Datos MecanicosPara Seguridad Medidas DE SeguridadInstrucciones DE Conexion a Tierra Etiquetas DE AdvertenciaEtiqueta DE Advertencia Situado en la parte trasera de la máquinaComponentes DE LA Máquina Instalación DE LA Máquina Contenido de la MáquinaFijación DEL Mango Instalación DE LA MANGUERA/VARA DE VACíO Preparacion DE LA MáquinaOperación DE LA Máquina Sistema DEL Sensor Electrónico Funcionamiento DE LA VaraLuz Anaranjada centelleante = Bolsa Llena o Mantenimiento DE LA Máquina Mantenimiento Semanal Cada 20 horas de usoMantenimiento Trimestral Cada 250 horas de uso Articulos Recomendados Para Mantener EN Existencia Almacenamiento DE LA MáquinaMantenimiento DEL Cepillo Ajuste DEL Pestillo DE PIELocalizacion DE Averías Problema Causa SoluciónEspecificaciones Modelo120V 220V/230V/240V Electrical Diagrams Diagramas Electricas Bluered GRN Home Find Go To Description QTY 104 Dcarbon Brush 120V 2 Pack ViperR KNOB, HT. Adjustment Options Opciones

608669 specifications

The Philips 608669 is a cutting-edge electric shaver known for its advanced technology and user-friendly features, designed to offer an exceptional shaving experience. As part of Philips’ renowned shaver series, the 608669 stands out due to its innovative design and smart functionalities.

One of the key highlights of the Philips 608669 is its MultiPrecision Blade System. This system features ultra-thin blades that are able to cut hair from both the skin level and just above it, ensuring a close shave with minimal skin irritation. The shaver is equipped with self-sharpening blades that maintain their sharpness through continuous usage, eliminating the need for frequent replacements, thus providing long-lasting performance.

The Flex Heads of the 608669 are another noteworthy feature. These flexible heads can pivot in multiple directions, allowing for smooth and adaptable shaving even in tricky facial areas such as the jawline and neck. This feature not only enhances comfort but also ensures that the shaver closely follows the contours of the face for a more efficient shave.

Philips has also incorporated Skin Comfort Technology in the 608669. The shaver is designed with rounded tips that glide smoothly over the skin, minimizing the risk of nicks and cuts. This technology caters especially to sensitive skin, making the shaver suitable for a wide range of users.

The 608669 supports both wet and dry shaving, offering versatility for users who prefer shaving in the shower or with shaving foam for added comfort. This adaptability ensures that every shaving experience is personalized.

In terms of power, the Philips 608669 boasts a robust lithium-ion battery that provides a long runtime—up to 50 minutes of cordless shaving after just a 1-hour charge. Additionally, it features a quick-charge option that allows for a single shave from just a 5-minute charge, ensuring convenience for users on the go.

For easy maintenance, the shaver includes a cleaning system, making it simple to keep the blades and heads in optimum condition. Moreover, an intuitive LED display indicates battery status and cleaning alerts, keeping users informed about the shaver's performance.

Overall, the Philips 608669 is a prime example of innovation in personal grooming, combining advanced shaving technology with user-focused features for a superior shaving experience.