Specifications | Behringer MX2642A instruction

	EURORACK MX2642A

10. SPECIFICATIONS
Input Channels
Mic Input	Electronically balanced, discrete input configuration
Mic E.I.N. (22 Hz - 22 kHz)	-129.0 dBu, 150 Ohm source
	-117.3 dBqp, 150 Ohm source
	-132.0 dBu, input shorted
	-122.0 dBqp, input shorted
Distortion (THD & N)	0.007% @ +4 dBu, 1 kHz, bandwidth 80 kHz
Gain Range	+10 dB to +50 dB
Max Input (Mic)	+12 dBu
Line Input	Electronically balanced
Gain Range	Unity to +40 dB
Max Input (Line)	+22 dBu
Channel Fader Range	+10 dB to -85 dB
Aux Send Gain Range	“Off” to Unity to +15 dB
Equalization
Hi shelving	12 kHz +/-15 dB, Q fixed at 2 oct.
Hi Mid shelving	3 kHz +/-15 dB, Q fixed at 2 oct.
Mid sweep	100 Hz - 8 kHz +/-15 dB, Q fixed at 1 oct.
Lo Mid shelving	500 Hz +/-15 dB, Q fixed at 2 oct.
Lo shelving	80 Hz +/-15 dB, Q fixed at 2 oct.
Lo Cut (High Pass) filter	75 Hz, 18 dB/oct.
Channel Direct Out
Max Output	+22 dBu
Noise @ Unity Gain	-94 dBu
Output Impedance	120 Ohm
Channel Insert
Max In / Out	+22 dBu
Channel to Channel Crosstalk	-95 dB @ 1 kHz
Subgroup Section
Noise	Bus noise @ fader 0 dB: -102.5 dBr (ref.: +4 dBu);
	-92.5 dBr (ref.: +4 dBu, all channels assigned and set @ Unity Gain)
Submaster Output Max Out	+22 dBu balanced/unbalanced
Fader Range	+10 dB to -85 dB/“off”
Main Mix Section
Noise	Bus noise @ fader 0 dB: -101.0 dBr (ref.: +4 dBu);
	-92.5 dBr (ref.: +4 dBu, all channels assigned and set @ Unity Gain)
Max Output	+28 dBu balanced, +22 dBu unbalanced
Aux Returns Gain Range	“off” to Unity to +20 dB
Aux Sends Max Out	+22 dBu
General
Distortion (THD & N)	0.007 %, @ +4 dBu, 1 kHz, Bandwidth 80 kHz;
Frequency Response	20 Hz - 40 kHz, +/- 1 dB
	any input to any output: 10 Hz -120 kHz +/- 3 dB
Physical
Dimensions (H * W * D)	ca.23/8"/6"(61/152.4mm)x171/8"/19"(435.6/482.6mm)x14"(355.6mm)
Net weight	7.5 kg

BEHRINGER is constantly striving to maintain the highest professional standards. As a result of these efforts, modifications may be made from time to time to existing products without prior notice. Specifications and appearance may differ from those listed or shown.

10. SPECIFICATIONS