(28)MIC 2 JACK - Connect your microphone with 1/4 inch (6.3mm) jack plug here. The signals can be controlled via CHANNEL 2, if the PHONO / LINE / MIC switch (5) is set to MIC 2.
(29)LINE 3 - PHONO 3 SELECTOR - Used to switch the
Replacing the Crossfader
Instructions for replacing the crossfader:
•Disconnect from main power supply
•Remove the fader knob.
•Remove the two outer screws.
•Take the fader out and unplug the connection cable.
•Connect the new fader and replace back into mixer.
Technical Specifications - model XDM-343
Inputs: |
|
Microphone | 1.5mV, 600 Ohm |
Phono | 1.2mV, 47kOhm |
Line | 100mV, 27kOhm |
Output | 20V, peak to peak |
Frequency range | |
Distortion | <0,03% |
| >85dB |
Talkover | |
Tone control | Treble: 10Khz ± 12dB |
| Middle: 1 KHz ± 12dB |
| Bass: 100 Hz ± 12dB |
Headphone impedance | 16 Ohms |
Power supply | AC115/230V, 50/60Hz |
Dimensions | 12.5” W x 10.25” D x 4” H |
| 262 x 320 x 102 mm |
Weight | 8 lbs. / 3.5 kg |
|
|
© American DJ® AUDIO Los Angeles, CA 90058 USA
Specifications subject to change without notice.