Akai MPC5000 manual Change Sequences in Track Mute Mode, Press a pad you would like to mute

3

„PAD MUTE

To turn on Pad Mute Quantization, do the following: 01. Press the [TRACK MUTE] Button

This will open the TRACK MUTE Page.

02.Press the [F3] (PdMUTE) button to select the PAD MUTE Tab.

03.Press the [F5] (T.C.) button.

The [F5] button will darken to indicate it is active as shown on the right.

04. Press a pad you would like to mute.

The MPC5000 will mute the selected pad on the next division of the T.C. setting.

Tip: For more information on Pad Mute, see page 81 of the MPC5000 Reference Manual.

For more information on Timing Correct, see page 24 of the MPC5000 Reference Manual.

„Changing the Timing Correct for Pad / Track Mute Quantization

To change the Timing Correct value while in TRACK or PAD MUTE Mode, press the [WINDOW] Button. This is separate from the MAIN Timing Correct, and is used exclusively for Pad / Track Mute. The following divisions are available:

2Bar

1Bar

1/4

1/4(3)

1/8

1/8(3)

1/16

Change Sequences in Track Mute Mode

The ability to change sequences when in TRACK MUTE Mode has been added. To change Sequences in TRACK MUTE Mode, do the following:

05. Press the [TRACK MUTE] Button

This will open the TRACK MUTE Page as shown on the right.

06.Press the [F1] (TkMUTE) button to select the TRACK MUTE Tab.

07.Select the 'SQ' field.

08.Press the [+] / [-] buttons or turn the [DATA] wheel to select the next sequence.

The next sequence to be played will be indicated with an '>' as shown on the right. The Sequence will change to the selected sequence at the end of the current sequence.