American Audio XDM-250TTM manual Introduction, Customer Support

Page 2

XDM-250T™

Unpacking

Every XDM-250T™ has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your mixer for any damage and be sure all equipment neces- sary to operate the mixer has arrived intact. In case damage has been found or parts are missing, please contact our toll free customer support number for further instructions, please do not return the mixer to your dealer.

XDM-250T™

Introduction

Introduction:

Congratulations and thank you for purchasing the American Audio® XDM-250T™ mixer. This mixer is a representation of American Audio’s continuing commitment to produce the best and highest qual- ity audio products possible at an affordable price. The XDM-250T™ comes with a two year limited warranty! Please read and understand this manual completely before attempting to operate your new mixer. This booklet contains important information concerning the proper and safe operation of your new mixer.

Customer Support:

American Audio® provides a toll free customer support line, to provide set up help and to answer any question should you encounter problems during your initial set up or operation. You may also visit us on the web at www.americandj.com for any comments or suggestions. Service Hours are Monday through Friday 9:00 a.m. to 5:30 p.m. Pacific Standard Time.

Voice:

(800) 322-6337

Fax:

(323) 582-2610

E-mail:

support@americandj.com

Caution! There are no user serviceable parts inside this mixer. Do not attempt any repairs yourself, doing so will void your manufactures warranty. In the unlikely event your mixer may require service, please contact American Audio® customer support.

Do not discard the packing carton in the trash. Please recycle when ever possible.

XDM-250T™

Set-Up Precautions

Please make any connections before you plug the mixer in. Be sure the Power switch is in the OFF position before connecting other devices to the mixer. All fader and volume controls should be set to 0 or minimum position, before the device is switched on. If the device has been exposed to drastic temperature fluctuation (e.g. after transportation), do not switch on the mixer immediately. The arising condensation of water might damage your device. Leave the device switched off until it has reached room temperature.

Operating Determinations:

When installing this mixer, please make sure that the device is not exposed to extreme heat, mois- ture or dust!

There should not be any cables lying around. Doing so endangers you as well as others.

Do not operate the mixer in extremely hot (more than 30° / 100°F) or extremely cold (less than 5°C / 40°F) surroundings.

Keep the unit out of direct sunlight and away from heaters.

Operate the mixer only after becoming familiar with its functions. Do not permit operation by persons not qualified for operating the mixer. Most damages are the result of unprofessional operation!

©American Audio® - www.americandj.com - XDM-250T™ Instruction Manual Page 2

Image 2
Contents American Audio Introduction Customer SupportXDM-250T Safety Precautions Top Panel Front PanelXDM-250T Controls and Features Rear Panel Cassette Deck R N TA B L E RCA to 1/4 Patch Cables Speaker Cables Replacing the Crossfader Year Limited Warranty Within 3dB 18dBVPhones Load=32 ohms 6dBV Master Output Load = 47K Ohms Less than 0.2%

XDM-250TTM specifications

The American Audio XDM-250TTM is an impressive piece of equipment designed for DJs and music enthusiasts who demand high-quality performance and versatility. This all-in-one DJ controller empowers users by integrating modern technology with user-friendly features, making it suitable for both beginners and seasoned professionals.

One of the standout features of the XDM-250TTM is its dual USB ports, which allow seamless transitioning between two laptops or devices. This functionality is crucial for DJs who often collaborate with other performers or need to quickly switch between multiple setups. The controller is also compatible with various DJ software, enabling users to choose their preferred platform for mixing tracks.

The XDM-250TTM boasts an intuitive layout with a large touch-sensitive jog wheel that enables precision control over track manipulation. This feature is particularly beneficial for scratching and beat juggling, offering users the tactile feedback they need to perform intricate techniques. Additionally, the product includes dedicated volume faders, gain controls, and a three-band EQ per channel, providing greater control over audio levels and sound shaping.

Another important characteristic of the XDM-250TTM is its built-in professional-grade audio interface. This allows for high-resolution sound output, ensuring that every mix is rich and dynamic. The controller supports a range of output formats, which means it can easily connect to speakers, mixers, and other audio equipment without any loss of quality.

In terms of connectivity, the XDM-250TTM does not disappoint. It offers various input options, including RCA, XLR, and 1/4" TRS outputs, making it adaptable to numerous setups. Furthermore, the inclusion of MIDI capabilities allows for enhanced command over additional hardware, such as synths and drum machines.

The design of the XDM-250TTM is both stylish and functional. The robust build ensures longevity, even under frequent use, while the sleek interface is aesthetically appealing. The RGB backlit pads provide visual feedback, making it easy to perform in low-light environments.

In conclusion, the American Audio XDM-250TTM is an excellent choice for DJs seeking a reliable, versatile, and feature-rich controller. Its advanced technologies, along with user-oriented design, make it a valuable asset for anyone serious about their craft. Whether performing live or practicing at home, the XDM-250TTM delivers the performance and functionality needed to elevate any DJ experience.