GE AS_16 Installation Instructions, Troubleshooting Tips Customer Service, Window Requirements

Read completely, then follow step-by-step.

1	Window Requirements
	■These instructions are for a standard double-
	hung window. You will need to modify them for

other types of windows.

■The air conditioner can be installed without the accordion panels if needed to fit in a narrow window. See the window opening dimensions at right.

■All supporting parts must be secured to firm wood, masonry or metal.

■The electrical outlet must be within reach of the power cord.

173⁄8″ min.

30″ to 41″

(With accordion panels)

26″ min.

(Without accordion panels)

Safety Instructions Operating Instructions

2	Storm Window Requirements
	A storm window frame will not allow the air
	conditioner to tilt towards the outside and will keep
	it from draining properly. To adjust for this, attach
	a piece of wood to the stool.
					Wood
		1/2″ higher
		than frame
				Stool
			Storm window
			frame

WOOD PIECES—

WIDTH: 2″

LENGTH: Long enough to fit inside the window frame.

THICKNESS: To determine the thickness, place a piece of wood on the stool to make it 1/2″ higher than the top of the storm window frame.

Attach securely with nails or screws provided by the installer.

Installation Instructions

3	Remove the Front Grille, if attached
	To remove the grille:

ARemove shipping tape if present. Lift the inlet grille (see the Care and Cleaning section) and remove the screw behind it (if present) that holds the grill in place.

B	Pull the grille
	with your thumb
	while pushing
	the case with
	your fingers.

C	Push the grille
	to the left and
	raise it up.

NOTE: Do not pull the bottom edge toward you more than 3 inches or you may damage the tabs of the grille.

Troubleshooting Tips

Customer Service

21