
DX4™ | Specifications |
Technical Specifications - Model: DX4, 4 Channel Audio Mixer. | |
POWER SUPPLY: | AC 115/230V, 50/60Hz (External 18V~500mA |
| Power Supply) |
DIMENSIONS: | 254 (W) x 308 (D) x 102.5 (H) mm |
WEIGHT: | 5.5 Lbs./2.8Kgs |
CROSSFADER: | Optical detecting fader start control - |
| Low Residue Resistance Crossfader. |
POWER CONSUMPTION: | 12 Watts Typical / |
| 16 Watt with full headphone output |
HEADPHONE IMPEDANCE: | 16 Ohms |
ENVIRONMENTAL CONDITION: | Operating Temperature 5 to 35 deg. C |
| Humidity 25 to 85% RH |
| Storage Temperature |
INPUT SENSITIVITY: |
|
LINE: | 10K ohm input impedance |
| 70mV rms sensitivity for 0dBm output |
PHONO: | 47Kohm input impedance |
| 1.1mV rms sensitivity @ 1KHz for 0dBm output |
MICROPHONE: | 10Kohm input impedance unbalanced |
| 1.0mV rms sensitivity for 0dBm output |
| 500mV rms max inputOutput Sensitivity (Level/ |
| Impedance): Note: 0dBV=1Vrms |
OUTPUT SENSITIVITY: |
|
MASTER OUT: | 9V rms max |
Head PHONES: | 0.5W into 47ohm |
FREQUENCY RESPONSE: |
|
LINE: | |
PHONO: | |
| @ 20Hz to reduce rumble and feedback |
MICROPHONE: | |
SIGNAL TO NOISE RATIO: (MAXIMUM OUTPUT): | |
LINE: | Better than 94dB |
PHONO: | Better than 85dB |
MIC: | Better than 76dB |
THD - Total Harmonic Distortion: |
|
MASTER OUTPUT: | Less Than 0.1% |
CHANNEL EQUALIZER: |
|
BASS: | |
LOW MIDDLE: | |
HIGH MIDDLE: | |
TREBLE: |
|
Components and parts are subject to change for improvements within the range of the specifi cations.
©American Audio® - www.americandj.com - DX4™ Instruction Manual Page 13