Ashly LX-308B manual Specifications Distortion, Frequency Response, Crosstalk, VU Meters

Operating Manual - LX-308B Stereo Line/Microphone Mixer

10. SPECIFICATIONS

DISTORTION

THD at +20 dBu, 20Hz-20KHz . . . . . . . . . . . . . <0.02% IMD (SMPTE) at +20dBu . . . . . . . . . . . . . . . . . . <0.01%

HUM & NOISE (20Hz-20KHz)

residual output noise, all levels at minimum <-100dBu MASTER OUT, MASTER LEVEL and one

INPUT LEVEL at nominal (unity gain)	. . . . . <-87dBu
FREQUENCY RESPONSE
20Hz-20KHz	. . . . . . ±0.2dB

VOLTAGE GAIN (dB±1) INPUTS or SUB INPUTS to

MASTER OUTPUTS (levels at nominal) . . . . . . . . 0dB INPUT to MASTER OUTPUT (levels at max) . . . 25dB Ch.1 or Ch.2 INPUT in MIC position to

MASTER OUTPUTS . . . . . . . . . . . . . . . . . . . . . . . . 56dB SUB INPUTS to MASTER OUTPUTS

(master level at max) . . . . . . . . . . . . . . . . . . . . . . . . 18dB

CROSSTALK

adjacent inputs or input to output at 1KHz . . . . <-80dB adjacent inputs or input to output at 20KHz . . <-60dB

VU METERS

Two 5-segment LED meters. . . . . . . . . . . . . 0VU=+4dBu

PEAK INDICATORS

activated when internal signal is 3dB below clipping

SHIPPING WEIGHT

9 lbs. maximum

POWER REQUIREMENTS

120 VAC nominal, 93 VAC minimum, 50-60 Hz, 12 watts (240 VAC available)

*unless otherwise stated, specification conditions are: 150Ω source, all levels set at nominal, outputs into 2.7KΩ or greater.

9