Nilfisk-ALTO GHIBLI 16FX Operating LED, Phones, VU Meter, Bass Enhancer, Main MIX Level

Page 10

4.19 OPERATING LED

25

The operating LED, when is on, shows that the main power supply is present and the mixer is operating.

4.20 PHONES

26

This control sets the amount of signal sent to the PHONES output.

4.21 VU METER

27

It is the output VU meter of the mixer, it shows both the left and right output signal level.

4.22 BASS ENHANCER

28

This is the BASS ENHANCER processor switch. Inserting this processor it is possible to increase and optimize the general per- formance at low frequency of the mixer.

4.23 MAIN MIX LEVEL

29

This control sets the amount of signal sent to the MAIN MIX LEFT and RIGHT outputs.

OPERATING

BASS ENHANCER

 

0dB

 

 

BYPASS

ON

- 8

+10

 

PHONES

LEFT

-20 -10 0 10

RIGHT

MAIN MIX LEVEL

25

28

26

27

29

4.24 CENTER & SURROUND OUT

30

This is Center and Surround output of the mixer. You can pick up their signals using an insert cable.

4.25 AUX1 OUT

31

This is the AUX1 output, it is useful to connect active monitors to the mixer.

4.26 AUX2 OUT

 

32

30

 

 

This is the AUX2 output, using its signal it is possible to feed

 

an external effect processors, wiring the effect return to one

 

of the stereo channels of the mixer.

31

4.27 PHONES

33

 

This socket will be used to send the signal to a pair of head-

32

phones as well as active monitors.

 

4.28 MAIN MIX OUTPUT

34

 

This stereo output is controlled by the MAIN MIX LEVEL on

33

the front panel and will send the audio signal to an external

 

amplifier. It is electronically balanced and it has got a profe-

 

ssional standard level of +4dBu. You can use both for stereo

 

and for surround system wiring.

 

4.29 REAR PANEL

 

 

 

- POWER SUPPLY

 

35

 

CENTER &

SURROUND OUT

AUX1 OUT

AUX2 OUT

PHONES

R

LTO

GHIBLI 16 FX

16-CHANNEL MIXING CONSOLE

WITH DIGITAL EFFECTS

LEFT BALANCED +4dBu OUT

RIGHT BALANCED +4dBu OUT

34

Used to connect the supplied 24V AC adapter, supplied by LTO company only.

- POWER ON/OFF SWITCH

36

This switch is used to turn the main power ON and OFF.

36 35

MODEL

SERIAL

POWER POWER

ON SUPPLY

9

Image 10
Contents Ghibli 16/ Ghibli 16FX External Connection Power SupplyDo Not Remove Any Covers Table of Contents Introduction FeaturesReady to Start Control Elements GhibliGhibli 16 FX Ghibli 16FXMono Channel Insert Tube Sound Compressor SwitchMIC/LINE Input Stereo Input CH5~CH16Mute Switch Input Level SettingMID Frequency Sweep Reverb Level Control PresetsFX Level Control Peak LEDOperating LED Rear Panel Power SupplyPower ON/OFF Switch PhonesInstallation and Connection Some Final Tips on Wiring Configuration Stereo TRS Jack PlugTapped Connection Direct Output Lead Preset List for Ghibli 16FX System Block Diagrams Headphoneoutput AUX1PRE AUX2POSTDiagram Technical Specification Return Notice WarrantyWarranty Registration Card Terms and ConditionsSeikaku Technical Group Limited