5.1SOME FINAL TIPS ON WIRING CONFIGURATION
You can connect unbalanced equipment to balanced inputs and outputs. Simply follow these schemes.
Sleeve Tip
Ring=Right Signal
Ring
Strain Clamp
Tip=Left Signal
Sleeve=Ground/Screen
Use for Headphone
1/4" Stereo (TRS) Jack Plug
Sleeve Tip
Strain Clamp
Tip=Signal
Sleeve=Ground/Screen
Use for Mono Line In, Mono 1/4"Jack Plugs
1/4" Mono (TS) Jack Plug
Sleeve Tip
Ring=Return Signal
Ring
Strain Clamp
Tip=Send Signal
Sleeve=Ground/Screen
Use for Insert Points
1/4" Stereo (TRS) Jack Plug
2 1
2=Hot(+) | 3 | 1=Ground/Screen |
|
|
Use for Balanced Mic Inputs
(For unbalanced use, connect pin 1 to 3)
2 1
2=Hot(+) | 3 | 1=Ground/Screen |
|
|
Use for Main output
(For unbalanced use, leave pin 3 unconnected)
|
|
(seen from soldering side) | (seen from soldering side) |
11