can be difficult to start. To replace the handlamp head, reverse the procedure – ensuring that the handlamp head is screwed fully closed.
7.4. Bulb replacement
With the handlamp head removed the bulb is accessed by unscre- wing - in an anticlockwise direction - the bulb retention socket. Please ensure that only correctly specified bulbs are used.
7.5. Battery replacement
When the battery power is becoming exhausted all of the batteries should be replaced. Only those batteries of the corresponding per- mitted types can be used.
With the handlamp head removed the batteries can be accessed and removed from the cavity of the main casing.
Replace in reverse procedure – ensuring that all the contacts are clean.
8. Repairs
The general terms and conditions of ELEX V apply to repair work. The manufacturer must carry out the repair work in order to check for the safe functioning of the protective circuits.
9. Cleaning
The equipment should only be cleaned using a cloth or sponge dampened with water. The use of cleaning solutions or scouring agents is not advised.
15