Lexicon CP-3 owner manual Video Connections

Page 21

Connection

CP-3 Digital Surround Processor

The CP-3 has three video inputs and one video output. The inputs are

Video Connections

 

labeled VIDEO IN 1, 2, and 3, and are switched along with audio inputs 1,

 

2, and 3 via the front panel or either remote. (Audio Input 4 will use the video

 

signal from Video Input 1.) These inputs are designed for standard NTSC

 

composite video signals such as those found at the outputs of video disc

 

players and VCRs.

 

If the CP-3 is turned off via remote or front panel, the last selected video

 

input will continue to be fed to the output (the audio will be muted), so the

 

CP-3 need not be left on, for example, for simple TV viewing. If the master

 

power switch on the CP-3 rear panel is turned off, or if power is removed

 

from the CP-3, the unit will default to Input 1 for audio and video, and will

 

continue to pass that signal through to the output.

 

NOTE: The CP-3 video inputs are designed for NTSC "M" composite video signals. The video circuitry is capable of overlaying text on the incoming video signal; it is also capable of generating its own blue text background in the absence of an incoming video signal. Even though the video circuitry is designed for NTSC only, it can synchronize to incoming PAL and SECAM composite video signals and overlay text on the picture. In doing this, however, the text will lose sharpness, especially in SECAM.

17

Page 20 Page 22
Image 21
Page 20 Page 22
Contents CP-3 Precautions Unpacking and InspectionAcknowledgements Safety Suggestions CP-3 Digital Surround Processor Contents Introduction Introduction to the CP-3 Using the Documentation Glossary of Terms Finding your way around System OverviewIntroduction to the CP-3 Input Controls Indicators Front PanelRear Panel Power On/OffOn/Off Standard RemoteModes Expanded RemoteRefer to the Expanded Remote AC Connections ConnectionWire Lengths Wiring ConsiderationsLength AWG Size & Stranding Audio/Video Cables Speaker ConnectionsAudio/Video Connections Connecting the CP-3 as a preamp Connecting the CP-3 in a Tape Monitor Loop Video Connections P U T S Calibration LCD AdjustmentS P L a Y M E N U O S D P O S I T I O N D C O N T R a S TVideo On-Screen Display Calibration Setting the Speaker Configuration Adjusting Input Parameters Setting Input Levels+ , . / 0-9 A-Z Signal-to-Noise Optimization Automatic Input ModeAuto-Mode Load LoadingPAL and Secam Setting Output LevelsCalibration Calibrating the Listener Position Calibrate Noise Calibrate Left only Setting Rear Delay Settings Lock OFF Customization Locking In Settings Custom NameCustom Modes Mode Loads register Default presetStore Menu Store this Mode SET Mode Name Renaming a mode Presets and User Registers Using the ModesPanorama Parameters Using CP-3Using CP-3 Ambience Parameters AmbienceUsing CP-3 Reverb Parameters Using CP-3 Surround Parameters Television SurroundUsing CP-3 Music Full Range Mono Logic Pro Logic THX Cinema Problem Possible Cause and Solution TroubleshootingPossible Cause and Solution ProblemRestore Mode Setup to Exit Routine Maintenance Restoring DefaultsInstallation Documentation Lexicon Input AC Power wiring notesOSD Position Display TimeSpecifications Lexicon, Inc Oak Park Bedford, MA Tel Fax

CP-3 specifications

The Lexicon CP-3 is a high-performance audio processor known for its exceptional sound quality and advanced features, making it a preferred choice for audiophiles and sound professionals alike. This preamplifier and audio processor delivers a remarkable listening experience, incorporating cutting-edge technologies and sophisticated design.

One of the standout features of the CP-3 is its multi-channel processing capability. With support for various audio formats, it provides an immersive surround sound experience, making it a perfect fit for home theaters and high-end audio setups. The processor boasts a robust array of inputs and outputs, ensuring compatibility with a wide range of audio equipment and allowing seamless integration into existing systems.

The Lexicon CP-3 employs proprietary technologies, such as the acclaimed Lexicon Digital Signal Processing (DSP), which delivers pristine audio reproduction with minimal distortion. This technology, combined with high-resolution audio processing, ensures that every nuance of the source material is preserved. The processor also supports various audio formats, including Dolby Atmos and DTS:X, which enhances the spatial dimension of audio playback.

Another significant aspect of the CP-3 is its user-friendly interface. The processor features an intuitive control panel and a well-organized menu system, allowing users to access and configure settings with ease. Additionally, it is equipped with a remote control for convenient operation, providing flexibility for users who prefer to adjust settings from a distance.

The build quality of the Lexicon CP-3 is impressive, reflecting the brand's commitment to durability and longevity. The chassis is designed to minimize interference and provide optimal shielding against electromagnetic noise. This attention to detail contributes to the overall sound quality, ensuring that users receive the best possible audio experience.

Furthermore, the CP-3 includes advanced room correction technologies that help calibrate the sound output based on the characteristics of the listening environment. This feature optimizes the audio performance, eliminating potential issues caused by room acoustics and providing listeners with a balanced and natural sound.

In conclusion, the Lexicon CP-3 is a versatile and powerful audio processor that excels in delivering high-fidelity sound. With its multi-channel processing capabilities, innovative technologies, user-friendly design, and commitment to quality, it stands as a formidable choice for both casual listeners and discerning audiophiles, enhancing any audio setup to new heights.
Top Page Image Contents