Safety Information and Technical Specifications
4-9 Connect Data and Power Cables
Connecting the Cables
1.Connect the SAS cables to the mobile rack. A longer SAS cable may be required (see the recommended cables listed earlier in this manual).
2.Connect the power cables from the chassis power supply. A power cable extension may be required.
4-10 Advanced Configuration
Use the following instructions in the unlikely event that you must access the jump- ers, buzzer, or other backplane components.
Remove
Screws
Remove
Screw
Mobile Rack
Casing
Remove
Screw
Figure 4-4: Mobile Rack and Rear Casing
Accessing the Mobile Rack Backplane (Optional)
1.Remove the two screws that secure the casing to the mobile rack.
2.Slide the casing downward and remove it from the mobile rack.