Polk Audio AB710, AB510 instruction manual Removal after Installation

Page 3

CLAMP WILL

ROTATE AS YOU

TIGHTEN.

INSTALLING IN EXISTING CONSTRUCTION

Once you have determined the exact placement of your speakers and the templates are in position on your wall or ceiling, you are ready to cut your mounting hole:

1.) Select locations for both of your loudspeakers.

2.) Check locations for interference from studs, pipes, wiring etc. before cutting.

3.) Use the template (supplied in packaging) to scribe the mounting holes.

4.) Cut mounting holes.

5.) Fish wires from amplifier (leave at least two feet slack).

6.) Secure cables to the wall, ceiling or a stud with cable tie or tape.

7.) Make sure mounting screws are extended adequately for wall thickness, fold clamps in towards chassis and place the baffle in the mounting hole.

8.) Tighten all three mounting screws. Clamps will rotate into place as you tighten.

9.) Connect the speaker wires to the pigtails with wire nuts

or solder. Use electrical tape to protect connections. Connect pigtails to loudspeaker matching amplifier positive and negative terminals to plus(+) and minus(-) terminals

on loudspeaker.

10.) Install the loudspeaker into the baffle with 4 supplied screws. Install the grilles.

Removal after Installation

If it should ever be necessary to remove the AB Series Loudspeaker from the wall, you must first remove the loudspeaker from the baffle. Loosen the mounting screws just enough to allow the dogs to rotate out of the way of the chassis.

INSTALLING IN NEW CONSTRUCTION

A rough-in kit is available separately to facilitate installations in open framed walls and ceilings. Instructions and suggestions are provided with this kit.

TROUBLESHOOTING

1. No sound from speakers.

•Check all amplifier connections and connections to speakers. •Make sure amp is connected to AC outlet and

switched on.

2.Distortion at very high listening levels. •Listen at lower levels.

•Purchase larger amplifier.

3.Not enough bass.

•Make sure speakers are in phase.

TECHNICAL ASSISTANCE

If you have any questions or problems with your loudspeaker system, please do not hesitate to contact your authorized Polk Audio dealer from whom you purchased your loudspeakers. Your Polk Audio dealer has the experience needed to pinpoint any problems that may exist and has easy access to technical information from the Polk Audio factory. If you need assistance or information on other Polk Audio loud- speakers for your home or car, call 1-800-377-7655.

For more information visit our web site at http://www . polkaudio . com

Image 3
Contents Series Routing the Wire Wire RecommendationsRemoval after Installation Metro Drive Baltimore, MD 21215 USA 800

AB710, AB510 specifications

Polk Audio has long been a trusted name in the world of audio equipment, and the AB510 and AB710 speakers are no exception. Designed to deliver superior sound quality and performance, these models embody advanced technology and robust engineering, making them ideal for both music enthusiasts and home theater aficionados.

The Polk Audio AB510 features a 10-inch dynamic balanced woofer that ensures deep, powerful bass response. This woofer is complemented by a 1-inch silk dome tweeter, which provides crystal-clear highs, resulting in a well-rounded listening experience. Similarly, the AB710 incorporates an 8-inch woofer and a 1-inch tweeter, designed to offer crisp treble and impactful midrange frequencies.

One of the standout features of these speakers is Polk's proprietary PowerPort technology. This innovative design helps in delivering better bass response and minimizes distortion, allowing listeners to enjoy a full, rich sound profile whether they're watching a movie or listening to their favorite tracks. This technology also extends the low-end frequencies, providing a more immersive experience in any audio setting.

Both the AB510 and AB710 are built with durable materials, showcasing a classic aesthetic that can seamlessly fit into any home décor. Their cabinets are engineered to reduce resonance, further enhancing sound clarity. Additionally, these speakers are designed with versatility in mind, enabling them to perform excellently in stereo setups or as part of a larger home theater system.

Connectivity options are another highlight; both models can easily integrate with various audio systems, ensuring that users can enjoy their favorite content without hassle. Their sleek design allows for ease of placement in any room, whether mounted on the wall or set up on a stand.

For those seeking a high-performance audio solution, the Polk Audio AB510 and AB710 stand out as exceptional choices. With their advanced features, robust construction, and state-of-the-art technology, these speakers represent a commitment to delivering high-quality sound that can elevate any auditory experience. Whether you're an audiophile or a casual listener, Polk Audio’s latest offerings promise to provide satisfaction and enjoyment for years to come.