Metro Drive Baltimore, MD 21215 USA 800

AB SPECIFICATIONS

AB510	AB710
Driver Complement:	Driver Complement:
5.25" (133mm) polymer laminate midwoofer	6.5" (165mm) polymer laminate midwoofer
.5" (12mm) polymer dome tweeter	.5" (12mm) polymer dome tweeter
Overall Size:	Overall Size:
8.125" (207mm) round	8.125" (207mm) round
Cutout Size:	Cutout Size:
7.25" (184mm) round	7.25" (184mm) round
Mounting Depth (less wall thickness):	Mounting Depth (less wall thickness):
1.525" (39mm)	3.135" (79mm)
Overall Frequency Response:	Overall Frequency Response:
60 - 20,000 Hz	40 - 20,000 Hz
-3dB Limits:	-3dB Limits:
78 - 18,000 Hz	58 - 18,000 Hz
Recommended Amplification:	Recommended Amplification:
5 - 75 watts / channel	5 - 100 watts / channel
Nominal Impedance:	Nominal Impedance:
Compatible with 8 ohm outputs	Compatible with 8 ohm outputs
Sensitivity:	Sensitivity:
88 dB @ 1 watt / 1meter	88 dB @ 1 watt / 1meter

Note: Specifications are subject to change without notice.

POLK AUDIO LIMITED WARRANTY

Polk Audio, Inc. warrants to the original purchaser only that this Polk Audio Loudspeaker Product (the “Product”) will be free from defects in materials and workmanship for a period of five (5) years from the date of original retail purchase from a Polk Audio Authorized Dealer. However, this Warranty will automatically terminate prior to the expiration of the five (5) years if the original retail purchaser sells or otherwise transfers the Product to any other party. The original retail purchaser shall here- inafter be referred to as “you.” To allow Polk Audio to offer the best possible warranty service, please fill out the Product Registration Card(s) and send it to the Factory, at the address provided on the Product Cards(s) within ten (10) days of the date of purchase.

Defective Products must be shipped, together with proof of purchase, prepaid insured to the Polk Audio Authorized Dealer from whom you purchased the Product, or to the Factory at the address given on this manual. Products must be shipped in the original shipping container or its equivalent; in any case the risk of loss or damage in transit is to be borne by you. If upon examination at the Factory or Polk Audio Authorized Dealer it is determined that the unit was defective in materials or workmanship at any time during this Warranty period, Polk Audio or the Polk Audio Authorized Dealer will, at its option, repair or replace this Product at no additional charge, except as set forth below. All replaced parts and Products become the property of Polk Audio. Products replaced or repaired under this warranty will be returned to you, within a reasonable time, freight prepaid.

This warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures, commercial use, voltage inputs in excess of the rated maximum of the unit, cosmetic appearance of cabinetry not directly attributable to defect in materials or workman- ship, or service, repair, or modification of the Product which has not been authorized or approved by Polk Audio. This warranty shall terminate if the Serial number on the Product has been removed, tampered with or defaced.

This warranty is in lieu of all other expressed Warranties. If this Product is defective in materials or workmanship as warranted above, your sole remedy shall be repair or replacement as provided above. In no event will Polk Audio, Inc. be liable to you for any incidental or consequential damages arising out of the use or inability to use the Product, even if Polk Audio, Inc. or a Polk Audio Authorized Dealer has been advised of the possibility of such damages, or for any claim by any other party. Some states do not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply to you.

All implied warranties on this Product are limited to the duration of this expressed Warranty. Some states do not allow limitation on how long an implied Warranty lasts, so the above limitations may not apply to you. This Warranty gives you specific legal rights, and you also may have other rights which vary from state to state.

This Warranty applies only to Products purchased in the United States of America, its possessions, and U.S. and NATO armed forces exchanges and audio clubs. The Warranty terms and conditions applicable to Products purchased in other countries are available from the Polk Audio AuthorizedDistributors in such countries.

5601 Metro Drive

Baltimore, MD 21215 USA

(800)377-7655

http://www.polkaudio.com

“Polk”, “Polk Audio”, “The Speaker Specialists” and “Dynamic Balance” are registered trademarks of Polk Investment Corporation used under license by Polk Audio Incorporated.

RM0451-1

AB710, AB510 specifications

Polk Audio has long been a trusted name in the world of audio equipment, and the AB510 and AB710 speakers are no exception. Designed to deliver superior sound quality and performance, these models embody advanced technology and robust engineering, making them ideal for both music enthusiasts and home theater aficionados.

The Polk Audio AB510 features a 10-inch dynamic balanced woofer that ensures deep, powerful bass response. This woofer is complemented by a 1-inch silk dome tweeter, which provides crystal-clear highs, resulting in a well-rounded listening experience. Similarly, the AB710 incorporates an 8-inch woofer and a 1-inch tweeter, designed to offer crisp treble and impactful midrange frequencies.

One of the standout features of these speakers is Polk's proprietary PowerPort technology. This innovative design helps in delivering better bass response and minimizes distortion, allowing listeners to enjoy a full, rich sound profile whether they're watching a movie or listening to their favorite tracks. This technology also extends the low-end frequencies, providing a more immersive experience in any audio setting.

Both the AB510 and AB710 are built with durable materials, showcasing a classic aesthetic that can seamlessly fit into any home décor. Their cabinets are engineered to reduce resonance, further enhancing sound clarity. Additionally, these speakers are designed with versatility in mind, enabling them to perform excellently in stereo setups or as part of a larger home theater system.

Connectivity options are another highlight; both models can easily integrate with various audio systems, ensuring that users can enjoy their favorite content without hassle. Their sleek design allows for ease of placement in any room, whether mounted on the wall or set up on a stand.

For those seeking a high-performance audio solution, the Polk Audio AB510 and AB710 stand out as exceptional choices. With their advanced features, robust construction, and state-of-the-art technology, these speakers represent a commitment to delivering high-quality sound that can elevate any auditory experience. Whether you're an audiophile or a casual listener, Polk Audio’s latest offerings promise to provide satisfaction and enjoyment for years to come.