Multiquip MT-85H operation manual Transporting, Emergencies, Maintenance Safety

Page 7

NEVER Run engine without air filter. Severe engine may occur.

Always service air cleaner frequently to prevent carburetor malfunction.

Always be sure the operator is familiar with proper safety precautions and operations techniques before using rammer.

Always store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.

NEVER use accessories or attachments, which are not recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

NEVER Run engine without air cleaner. Severe engine damage may occur.

Always read, understand, and follow procedures in Operator’s Manual before attempting to operate equipment.

Always be sure the operator is familiar with proper safety precautions and operations techniques before using pump.

Always store equipment properly when it is not being used. Equipment should be stored in a clean, dry location out of the reach of children.

Refer to the ROBIN Engine Owner's Manual for engine technical questions or information recommended by Multiquip for this equipment. Damage to the equipment and/or injury to user may result.

RULES FOR SAFE OPERATION

Transporting

Always shutdown engine before transporting.

Tighten fuel tank cap securly and close fuel cock to prevent fuel from spilling.

Drain fuel when transporting rammer over long distances or bad roads.

When placing the rammer inside a truck-bed for transport, always tie-down the rammer.

Emergencies

Always know the location of the nearest fire extinguisher and first aid kit. Know the location of the nearest telephone. Also know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in the case of an emergency.

Maintenance Safety

NEVER lubricate components or attempt service on a running machine.

Always allow the machine a proper amount of time to cool before servicing.

Keep the machinery in proper running condition.

Fix damage to the machine immediately and always replace broken parts.

Dispose of hazardous waste properly. Examples of potentially hazardous waste are used motor oil, fuel and fuel filters.

DO NOT use plastic containers to dispose of hazardous waste.

MT-85H — PARTS & OPERATION MANUAL — REV. #8 (06/26/01) — PAGE 7

Image 7
Contents Tamping Rammer Model MT-85H Page Heres HOW to GET Help Table of Contents UPS Ground Service at no charge for freight Parts Ordering ProceduresRules for Safe Operation Transporting Maintenance SafetyEmergencies Operation and Safety Decals Rammer Gearbox and Spring Cylinder General InformationDefinition of Tamping Rammer Construction of Tamping RammerMT-85H Specifications MT-85H Controls and Components Inspection MT-85H OperationRammer Gearbox and Spring Cylinder Oil Bath EngineStopping The Engine Throttle Control LeverMT-85H Maintenance MT-85H Troubleshooting Guide MT-85H Troubleshooting Guide MT-85H Note Items Found In the Items Number Column Explanation of Code in Remarks ColumnMT-85H- Suggested Spare Parts MT-85H Crankcase and Engine Crank Gear MT-85H Guide Cylinder and Foot MT-85H Guide Cylinder and Foot MT-85H Tank and Handle Fuel Tank ASSY.,3L EC-12G Engine Robin Crankcase and CYL. Head Stud EC-12G Engine Robin Crankshaft and Piston Crankshaft and Piston EC-12G Engine Robin Crankshaft and PistonEC-12G Engine Robin Muffler and AIR Cleaner Muffler Compl EC-12G Engine Robin Governor Governor Yoke EC-12G Engine Robin Blower HOUSING/RECOIL STR LABEL, Engine Name EC-12G Engine Robin Electric Device Flywheel Compl EC-12G Engine Robin Carburetor Packing Terms and Conditions of Sale Parts Page WWW multiquip.com