Multiquip MT75HS operation manual Maintenance, Daily

Page 16

MAINTENANCE

Maintenance

Perform the scheduled maintenance procedures as indicated:

DAILY

■Thoroughly remove dirt and oil from the engine and control area.Clean or replace the air cleaner elements as necessary. Check and retighten all fasteners as necessary. Check the spring box and bellows for oil leaks. Repair or replace as needed.

WEEKLY

■Remove the fuel filter cap and clean the inside of the fuel tank.

■Remove or clean the filter at the bottom of the tank.

■Remove and clean the spark plug, then adjust the spark gap to 0.02~0.03 inch (0.6~0.7 mm). This unit has electronic ignition, which requires no adjustments.

■Clean air cleaner cover.

200 - 300 HOURS (Pre-Cleaner)

■Remove the element from the pre-cleaner (Figure 12) at the top of the crankcase (body side) and clean it with cleaning oil (kerosene).

PRE-CLEANER

■The air cleaner on the engine side will hardly be contaminated, if it is, however after cleaning the element with kerosene, dip it in mixed oil consisting of 3 parts of gasoline and 1 part of engine oil. Then tightly squeeze outer primary element (sponge) and shake off well the inner secondary element before installing them.

CLEANING THE OIL TANK

■Clean the inside of the oil tank regularly, preferably 2 or 3 times a year.

■In winter, be sure to clean the inside of oil tank to avoid the freezing of water that may have accumulated inside the tank.

CAUTION:

If water accidently got inside the oil tank, the oil may appear muddy. If this situation occurs, simply flush the tank, removing all foreign matter including water, and fill oil tank with fresh 2- stroke outboard motor oil.

■When cleaning the oil tank (Figure 13) perform the following procedure:

1.Remove the cock holder cover, oil hose, red and black lead wires from the float sensor.

 

YELLOW

GRAY

2-5 CC

 

13 -15 CC

SAE 30

 

SAE 30

 

Figure 12. Pre-Cleaner

■Lubricate the top element (yellow) with 2~5 cc of engine oil SAE-30.

■Lubricate bottom element (gray) with 13 ~15 cc of engine oil SAE-30 and completely squeeze out the excess oil from the element before installing.

Figure 13. Oil Tank

PAGE 16 — MT75HS RAMMER — OPERATION AND PARTS MANUAL — REV. #11 (01/12/12)

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Model MT75HS Proposition 65 Warning MT75HS Rammer Operation and Parts Manual REV. #11 01/12/12 Table of Contents Robin EC-12HS EngineParts Ordering Procedures Ordering parts has never been easierSafety Information Safety MessagesGeneral Safety Engine Safety Transporting Safety General Information Definition of Tamping RammerMT-75HS Rammer Specifications SpecificationsComponents MT-75HS RammerOperation Rammer Gearbox and Spring Cylinder Oil BathFuel Cock and Choke Lever Normal Shutdown Maintenance DailyFuel and OIL Lines Troubleshooting Engine Troubleshooting Symptom Possible Problem SolutionSymptom Possible Problem Solution Sample Parts List Explanation of Codes in the Remarks ColumnSuggested Spare Parts To 3 Units To 5 UnitsNameplate and Decals MikasaPart Name QTY. Remarks Crankcase and Engine Assy Part Name QTY Remarks Guide Cylinder and Foot Assy Piston PIN Tank and Handle Assy Fuel Tank Tank and Handle Assy PACKING, OIL Tank CAP Robin EC12HS Engine Crankcase Assy OIL Seal EC13 Robin EC12HS Engine Crankshaft and Piston Assy Part Name Robin EC12HS Engine Governor Assy Governor Lever Robin EC12HS Engine MUFFLER/AIR Cleaner Assy Muffler Compl Robin EC12HS Engine Carburetor Assy Throttle Valve Robin EC12HS Engine Recoil Starter Assy Cylinder Baffle Robin EC12HS Engine Electric Device Assy Wire 22 CP Robin EC12HS Engine Loose Parts Switch Float CP Terms and Condition of Sale Parts FreightpolicyMT75HS Rammer Operation and Parts Manual REV. #11 01/12/12 HERE’S HOW to GET Help

MT75HS specifications

The Multiquip MT75HS is a versatile and robust machine specifically designed for heavy-duty applications. This innovative piece of equipment is renowned for its reliability and efficiency, making it a popular choice among construction and landscaping professionals. With its unique features and advanced technology, the MT75HS is built to tackle tough tasks with ease.

One of the standout characteristics of the Multiquip MT75HS is its powerful engine. Equipped with a reliable Honda GX390 engine, this machine ensures optimal performance while maintaining fuel efficiency. The engine delivers impressive horsepower, allowing for quick and effective operation, even in challenging conditions. The MT75HS is designed to handle various terrains, making it ideal for both indoor and outdoor applications.

Another significant feature of the MT75HS is its hydraulic drive system, which allows for smooth operation and precise control. This system provides powerful torque that enables the machine to navigate steep inclines and uneven surfaces effortlessly. Additionally, the machine is equipped with high-capacity hydraulic pumps that ensure consistent performance, even under heavy loads.

The MT75HS also boasts an ergonomic design that enhances operator comfort and productivity. It features a spacious operator platform with easy-to-reach controls, reducing fatigue during extended use. The machine’s compact size allows for easy maneuverability in tight spaces, making it perfect for urban construction sites or residential landscaping projects.

Safety is a top priority with the Multiquip MT75HS. It comes equipped with several safety features, including an engine kill switch and a protective roll cage. These elements are crucial in preventing accidents and ensuring the well-being of the operator.

Additionally, the MT75HS offers a variety of attachments, making it an adaptable tool for various tasks. Whether it’s grading, digging, or transporting materials, this machine can be configured to meet specific job requirements. The versatility of the MT75HS makes it a valuable investment for contractors looking to expand their capabilities.

In summary, the Multiquip MT75HS combines power, efficiency, and safety in a compact package. Its advanced features, including a robust engine, hydraulic drive system, ergonomic design, and adaptability, set it apart in the market. For professionals seeking reliability and versatility in their equipment, the MT75HS is an excellent choice that can enhance productivity and tackle a wide range of tasks effectively.
Top Page Image Contents