Philips HTS7111 user manual Control devices, One-touch standby, Play audio from SoundBar

Page 17

Control devices

Control the SoundBar and the other connected HDMI-CEC compliant devices with a single remote control.

One-touch standby

When you press and hold (Standby) on the remote control, the SoundBar and all the connected HDMI-CEC devices (that support one-touch standby) switch to the standby mode.

If One-touch standby is enabled on your SoundBar, you can switch to standby with the remote control of the TV or other connected HDMI-CEC devices.

System Audio Control

You need to connect a device to the TV and route its audio output from TV to the SoundBar so that the SoundBar can switch to the corresponding audio source automatically. To use one-touch audio, switch on System Audio Control and map connected devices to the audio input connectors of the SoundBar.

TV Audio Mapping

You need to connect a device to the TV and route its audio output from TV to the SoundBar in order to map the device to the audio input connector (see ‘Play audio from SoundBar’ on page 17).

One-touch standby

The SoundBar and all connected HDMI-CEC

devices can be switched to standby by a remote

control.

1

Press SETUP repeatedly to select SYS

 

STBY on the display panel (see ‘Setup menu

2

options and settings’ on page 18).

Press OK.

3

Press the Navigation buttons ( / ) to

4

select ON.

Press OK to confirm.

5

Press EXIT to exit the menu.

Note

•• To disable One-touch standby, select OFF.

Play audio from SoundBar

You need to connect an HDMI-CEC device to the TV and route its audio output from TV to the SoundBar in order to map the audio of the connected device to your SoundBar.

1

Press SETUP repeatedly to select AUD

 

CTRL on the display (see ‘Setup menu

2

options and settings’ on page 18).

 

 

Press OK.

 

 

3

Press the Navigation buttons (

/

) to

 

select ON, and then press OK.

 

 

 

To play the audio from the TV

 

4

speakers, select OFF.

 

 

Press SETUP repeatedly to select TV

 

 

AUDIO on the display panel, and then press

5

OK.

 

 

Press the Navigation buttons (

/

) to

 

select the audio output for each connected

 

device.

 

 

 

HDMI ARC: Audio output through the

 

HDMI ARC connection.

 

 

 

COAX IN: Audio output through the

 

coaxial connection.

 

 

 

OPTI IN: Audio output through the

 

optical connection.

 

 

 

AUX: Audio output through the AUX

6

connection.

 

 

Press OK to confirm.

 

 

7

Press EXIT to exit the menu.

 

 

Note

•• HDMI ARC can only be selected if you connect your SoundBar to the HDMI ARC compliant TV through HDMI ARC connection (see ‘Option 1: Connect to TV through HDMI (ARC)’ on page 10).

English

EN 17

Image 17
Contents HTS7111 Page Contents Help and support Tutorials FAQsContact Philips ComplianceTrademarks SafetyCare of the environment Care for your productYour SoundBar Remote controlMain unit SourceEasyLink controls Subwoofer ConnectorsRear right Rear centerOption 2 Connect to TV through an analog audio cable Connect to other devices through HdmiOption 1 Connect audio through a digital optical cable Connect audio from TV and other devicesOption 2 Connect audio through a digital coaxial cable Option 3 Connect audio through analog audio cablesListen to a connected device Set up audio for connected devicesSound mode Sound options and settingsAuto volume Use your SoundBarIPod or iPhone MP3 playerPlay video and slideshows Switch onEasyLink Play audio from SoundBar Control devicesOne-touch standby Setup menu options and settings Change settingsAmbisound Position Front Right Left Corner Distance AboveWall mount Stand Apply factory settingsWall mount Display panelAmplifier Stand for SoundBar and TV STS1100/STS1300Audio Main unitRemote control batteries TroubleshootingSubwoofer Wall mountPlay