Operation
Control Functions
Propane Tank Valve
WARNING : Never open the Tank Valve unless the Grill is being prepared for use, to prevent the pooling of propane vapor.
Always open the Valve immediately before lighting the Grill, and always close it immediately after cooking has been completed.
Burner Control Valves
On Model CF9050, four valves independently control gas flow to each burner, as indicated on the front Control Panel.
On Model CF9080 there are five independent control valves for the main burners, and a separate control valve for the rotisserie burner (see Fig. 7).
The OFF position is indicated by the dot above each knob. A full range of flame adjustment is available from High to Low, (by turning a knob counterclockwise).
Electronic Ignition System
As you push the Igniter Button, you will hear a series of clicks as the igniter module generates an ignition spark to the burners. The burner should light within four seconds. The system is powered by a single “AA” battery. To remove or replace the battery, turn the push button knob counter clockwise, and carefully pull out the spring and battery. Ensure that the positive end of the battery is in the down (bottom) position before replacing the knob.
|
| IGNITER |
| MAIN |
| ROTISSRIE |
| |
|
|
|
| BURNER CONTROL |
| |||
|
| BUTTON | BURNERS (4 or 5) |
|
| |||
|
|
| (Model CF9080) |
| ||||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Fig. 7
Page 6