Viking VGBQ530T, VGIQ532T, VGIQ530E LP/PROPAN E TAN K CON Nection, LP/PROPANE Tank Requirements

Page 8

LP/PROPAN E TAN K CON NECTION

Outdoor grills orificed for use with LP/Propane gas come equipped with a high capacity hose/regulator assembly for connection to a standard 20 lb. LP/Propane cylinder equipped with a Type 1, QCC-1 connector. Hose assembly must comply with Elastomeric Composite Hose and Couplings for Conducting Propane and Natural Gas, CAN/CGA-8.1 standard or the Theromp/astic Hose and Hose Couplings for Conducting Propane and Natural Gas CAN 1-8.3 standard. (See LP/Propane tank requirements below). Each tank is supplied with a dust cap. Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve. Other types of caps or plugs may result in leakage of propane.

Connection: 1/2" (1.3 cm) NPT male with a 3/8" (.95) flare adapter

Operating Pressure: 10.0" W.C.R

To connect to LP/Propane regulator/hose assembly:

Although the flow of gas is stopped when the quick disconnect system is disconnected as part of its safety feature, you should always turn the LP/Propane tank main valve "OFF" after each use and during transport of the tank or unit. First connect the regulator to the grill unit by screwing the 3/8" flare coupling to the 3/8" flare adapter. Connect to the tank valve by screwing the Type 1, QCC-1 connector to the LP/Propane tank. Open the tank valve and check the connection between the regulator and the Type 1, QCC-1 fitting for leaks with a soapy water solution. If bubbles appear, tighten the connection. Repeat until all leaks have been stopped. ALWAYS CHECK FOR LEAKS AFTER EVERY LP/PROPANE TANK CHANGE. Any joint sealant used must be an approved type and be resistive to the actions of LP/Propane gas

3/8" flare j_'_'''_3/8" flare coupling

adapter

LP/PROPANE TANK REQUIREMENTS

*Tank must be

mounted in vertical

A dented or rusty LP/Propane tank may be

Type 1, QCC-1

position for proper

hazardous and should be checked by your tank supplier.

ventilation

connector

Never use a cylinder with a damaged valve. All tanks

 

 

 

should be equipped with an OPD (overfilling protection

 

 

device). This is a DOT requirement for all tanks purchased

after October 1, 1998 and will ensure that the tank is not

overfilled. The LP/Propane tank should be a standard 5-gal, 20 lb. gas cylinder tank approximately 12" in diameter and 18" high which must be constructed and marked in accordance with the Specifications for LP/Propane Gas Cylinders of the U.S. Department of Transportation (D.O.T.) or the National Standard of Canada, CAN/CSA-B339, Cylinders, Spheres and Tubes for Transportation of Dangerous Goods; and Commission. The cylinder connection device must be compatible with the Type 1, QCC-1 connector on the outdoor cooking appliance. All LP/Propane tanks must be mounted in a vertical position for proper ventilation. The cylinder must be provided with a shut-off valve terminating in an LP/Propane gas supply cylinder valve outlet specified. The cylinder supply system must be arranged for vapor withdrawal and provided with a listed overfilling prevention device. If the appliance is stored indoors the cylinder must be disconnected and removed from the appliance. Each tank is supplied with a dust cap. Place dust cap on cylinder valve outlet whenever the cylinder is not in use. Only install the type of dust cap on the cylinder valve outlet that is provided with the cylinder valve.

Other types of caps or plugs may result in leakage of propane. Cylinders must be stored outdoors in a well-vented area out of the reach of children.

Image 8
Contents Viking Installation Guide Please Read and Follow General InformationBasic Specifications T-SERIES Grills Basic Specifications E-SERIES Grills Electrical Connection for E-SERIESGRILLS GAS ConnectionGAS Conversion Natural Fixed Piping Connection LP/PROPANE Fixed Piping Connection FlowLP/PROPAN E TAN K CON Nection LP/PROPANE Tank RequirementsLeak Testing Installation Procedures for BUILT-IN Installation BUILT-IN Clearance Dimensions@@0 Cutout Dimensions SupportBurner Adjustment Flame Height Side Burners Performance Checklist Replacement PartsRotisserie System Final PreparationF20054H PSO606VR

VGBQ412T, VGBQ530E, VGIQ530E, VGIQ532T, VGBQ410T specifications

The Viking VGIQ530T, VGBQ530T, VGBQ532T, NGIQ532T, and VGBQ412E are part of Viking's prestigious line-up of outdoor cooking appliances, combining functionality with innovative technology to enhance the grilling experience.

Starting with the Viking VGIQ530T, this grill showcases advanced infrared technology, which ensures even heat distribution while reducing cooking time. Its generous 30-inch cooking surface offers ample space for grilling multiple items simultaneously, making it ideal for family gatherings or outdoor parties. The double-walled hood retains heat efficiently, contributing to better cooking performance while the integrated rotisserie provides the ability to slow-cook meats to perfection.

Next up is the Viking VGBQ530T, a testament to style and substance. This natural gas grill features a sleek, durable stainless steel construction that withstands the elements and maintains its elegance over time. With a large cooking area and powerful burners, it achieves high temperatures quickly, allowing for excellent searing capabilities. The grill's push-to-light ignition system ensures quick start-ups, and the signature Viking flavor bars help channel fats away from burners, promoting cleaner grilling while enhancing the smoke flavor of food.

The VGBQ532T model takes convenience to the next level with its easy-to-use controls and features a side burner, providing additional cooking space for side dishes or sauces. This grill embraces versatility with a wide range of cooking options, making it an invaluable asset for grilling enthusiasts. It also includes heating racks that keep grilled items warm without overcooking.

Moving on to the NGIQ532T, this model is equipped with tight temperature control for precise cooking. Its heavy-duty construction ensures longevity, while the ergonomic handle design enhances ease of use during grilling sessions. With Viking’s patented SureSpark ignition system, reliable start performance is guaranteed, even under adverse weather conditions.

Lastly, the Viking VGBQ412E is designed for those who prefer a compact yet powerful grilling solution. This 24-inch model is perfect for smaller outdoor spaces while still delivering remarkable grilling performance. With its high-efficiency burners and intuitive control knobs, the VGBQ412E provides a seamless grilling experience.

Together, the Viking VGIQ530T, VGBQ530T, VGBQ532T, NGIQ532T, and VGBQ412E represent a culmination of advanced engineering, thoughtful design, and impeccable style, catering to serious grillers seeking professional-grade results in their outdoor kitchens. These grills are built to transform the way you cook outdoors, ensuring exceptional flavor and performance every time.