Battery Replacement (T-Series Models)
Each grill is equipped with a battery for the electronic ignition. The 30" W. models only have (1) battery located under the left hand side of the control panel. All other models have (2) batteries located under each end of the control panel. The battery locations are shown on the control panel.
To replace the battery:
1.Slide out drip tray.
2.Locate round black cap which is inside the burner Box under the battery symbol on the control panel.
3.Unscrew cap. Battery is snapped in the cap.
4.Replace the battery by connecting corresponding post to post inside burner box.
5.Snap cap on battery and screw back into slot underneath control panel.
@@.=.
Round black cap which holds battery is located underneath control panel and behind drip tray
Repladng Ught Bulbs (E-Seriesonly)
1. Remove screw and light bulb holder |
|
from canopy housing. | Metal |
1.Unsnap glass light cover at opposite hinc end from metal hinge.
2.Firmly grasp light bulb and pull out.
3.Replace with a 64405,
4.Replace the light cover By first sliding into metal hinge and then snapping close on opposite end.
5.Reconnect power at the main fuse or circuit breaker.
Glass light cover
bulb
screw
2O