TRANSPORTATION AND STORAGE
1.Always use the Safety Cap when transporting or storing your cylinder.
2.Do not store in a building, garage, or other enclosed area.
3.Always store your cylinder outside.
4.Store out of reach of children.
5.Always transport in an upright position.
6.Do not smoke when transporting your cylinder.
Dust Cap
Regulator and LP Cylinder Connections
!CAUTION
The gas pressure regulator provided with this outdoor cooking appliance must be used. This regulator is set for an outlet pressure of 11 inches water column.
Your regulator is equipped with a Q.C.C. Type 1 quick connect system. It will not allow gas to flow until a positive seal has been made. It has a thermal element that will shut off the gas flow if the temperature reaches 240 degrees F (115 degrees C). It also has a
Before each use, check the gas hose for excessive abrasion or wear, or cuts. Replace a hose assembly showing those signs with the hose assembly specified in the parts list before using the grill.
TO CONNECT THE CYLINDER TO THE REGULATOR AND HOSE 1. Be sure the LP cylinder is “OFF” by turning the hand wheel clockwise
until it stops.
2.Place the cylinder into the base cabinet shelf of the grill with the valve facing outward. See Assembly Instructions to secure.
3.Be sure all burner controls are turned to the “Off” position.
4.Remove the safety cap from the from the cylinder valve.
5.Center the nipple of the regulator into the cylinder valve
6. Turn the black nut clockwise until it stops. Hand Tighten Only.
Do Not Use A Wrench.
20