Philips BQ04022 manual Step

Page 17

STEP 17

17-1 Pull the cylinder support up to the top of the cabinet.

17-2 Place the LP cylinder down into the tank support hole in the bottom panel. Ensure the valve faces towards the left panel or front of the cabinet.

17-3 Unhook the LP Cylinder Support Ring as shown.

17-4 Lower the LP cylinder Support Ring over the top of the LP cylinder and wrap around the neck of the cylinder. Secure in place using same hook.

! Warning

Do not attempt to hook up the LP cylinder to the regulator at this time.

STEP 18

Congratulations! Your grill is now assembled. Please proceed to read the General information and operation portion of this Grill Guide before attempting to hook up the LP cylinder or operating your grill.

17

Image 17

Contents This Grill is for Outdoor USE only For Your SafetyTable of Contents To the Consumer Safety PrecautionsTo the Installer or Person Assembling this Grill Customer Support Center Limited WarrantyBQ04022 Assembly InstructionsBQ04022 Detail Parts List BQ04022 Detail Parts List Part List Step Step Step 11.A Step Step Insert the Cooking grate 7.A & 7.B into the Firebox Step Step Operation General Information and InstructionsLP Cylinder Leak Test LP Cylinder Filling and ExchangeTransportation and Storage Regulator and LP Cylinder ConnectionsLeak Testing the REGULATOR, VALVES, HOSES, and Connections Lighting Grill OperationsLighting the Side Burner with the Match Lighting Stick Lighting the Main Burners Using Electronic IgnitionLighting the Side Burner with Electronic Ignition Turning OFF Your Grill Cleaning Your GrillElectronic Ignition Maintenance Cleaning the BurnersBurner Flames AlwaysDirect VS. Indirect Cooking Grilling With Your New GrillSide Burner Grilling Tips and TricksFood Safety Trouble Shooting GuideBurner will not Light Irregular Flame or Yellow FlameFire Behind Control Panel Excessive FLARE-UPSCan I convert my gas grill from one fuel source to another? Frequently Asked Questions