1)Wrap aluminum foil around the Burners to prevent insects from entering the burner holes. Before next use, remove aluminum foil from Burners.
2)To maintain the condition and extend the life of your grill, cover the unit when stored outside for any length of time, especially during the winter months.
3)Periodically check and tighten all nuts, bolts, and screws. Make sure all electrode and ground wires are not loose.
4)Make sure the Grill works mechanically and that the Grill Hood locks.
To reduce the risk of injury or parts falling out during transport:
·Make sure legs are folded and locked and Hood and Bowl is latched securely.
To transport or store your grill....
1)Remove the grease cup. Disconnect the LP Cylinder and properly store it away.
2)Lock the Hood and Bowl with the latch. Make sure it is securely latched.
3)Lay the Grill on its side. Fold the legs under the grill in the reverse order of page 4 instructions. Lock the legs with the leg pivot latch.
4)Lift the Grill up to allow wheels to roll.
5)Transport your grill by holding the Hood handle. (FIG. A) To store away, lean your grill against a wall resting on the fixed leg plugs (FIG. B) or hang on the side of a wall
(FIG. C). Hang grill under the folded legs. Do not hang grill by the Control Panel.
FIG. A
FIG. B
FIG. C
12