Meco 4280 Walk-a-bout manual Setting UP Your GAS Grill, Bottom Bowl Bracket

Page 4

18

 

 

 

 

 

 

 

 

20

 

 

 

 

 

 

21

 

 

 

 

 

 

 

 

19

 

 

 

 

 

 

 

 

SETTING UP YOUR GAS GRILL

To reduce the risk of a cut, pinching or other bodily injury:

·Wear protective gloves when handling parts that could have sharp edges.

·Be careful while folding and unfolding the Grill legs.

Hood Latch

STEP 1) Lock Hood and Bowl with the Hood Latch.

STEP 2) Lay the Grill on its side in the grass or a soft area.

STEP 3) Swing Pivot Latch away from the Leg crossrod.

Leg

Crossrod

STEP 4) Swing legs out.

Bottom Bowl

Bracket

STEP 5) Grasp the Fixed Leg. Push it toward the Bottom Bowl Bracket and Safety Latch allowing the Fixed Leg Hook to engage all the way.

Fixed Leg Hook

STEP 6) Grasp the Hood Handle and Hood flange and raise the Grill up until it is upright on floor.

4

Image 4
Contents Gas Grill Model 4280 WALK-A-BOUTContents Features That Make Your Aussie Grill OutstandingAssembly Instructions Parts List and IllustrationsSetting UP Your GAS Grill Bottom Bowl BracketInstall Grease CUP Installation CodesREGULATOR/MANIFOLD Assembly LP CylinderLB. LP Cylinder 20 LB. LP CylinderOperating and Maintaining Your GAS Grill Using GASSelecting a Location Performing a Leak Test Lighting the GAS Grill Ignition Lighting the GrillManual Lighting the Grill Check Your FlameCleaning the Grill Cooking on Your Grill END of Cooking SessionCleaning the Burners Storage and TransportFIG. a Important Notice Troubleshooting ProblemWarranty Meco Corporation Limited WarrantyREL /06