Lighting Instructions, Igniter Lighting | Magma DM10-016LP instruction

LIGHTING INSTRUCTIONS

Igniter Lighting

Your Del Mar Grill is equipped with a Piezo crystal ignition that is activated through the valve control knob. For proper operation, the igniter/electrode should be clean and free from debris. Regular inspection and cleaning is recommended, (see“Maintaining you Grill”).

1.	Read Instructions	4.	Open the
2.	before lighting.		“Hideaway”
2.	Open lid during	5.	control panel.
3.	lighting	5.	Keep face away
3.	Verify that a propane		from the grill
	canister is installed		during lighting.
	and that it contains

sufficient propane.

Match Lighting

6. Depress the valve control knob and turn it counter-clockwise to the “HIGH” position. As the knob indicator passes the “LIGHT” position you will hear a definite “CLICK” indicating that the piezo

crystal has sparked.

7.Visually verify that ignition has taken place and that a flame is present.

8.Adjust flame as required to proper cooking temperature.

9.If the unit does not ignite, return the valve control knob to the “OFF” position, wait 5 minutes, and repeat the procedure.

If ignition does not take place using the igniter, you may light your grill with a“match”. Light the match and slowly insert into the match light hole (see photo 6 below).

1.	Read Instructions	4.	Open the
2.	before lighting.		“Hideaway”
2.	Open lid during	5.	control panel.
3.	lighting	5.	Keep face away
3.	Verify that a		from the grill
	propane canister		during lighting.
	is installed and
	that it contains

sufficient propane .

6.Light the match and slowly insert into the 1/2” match light hole. Note: The match must pass through 2 layers of stainless steel.

7.	Depress the valve
	control knob and turn
	it counter-clockwise to
8.	the “HIGH” position.
8.	Visually verify that
	ignition has taken
	place and that a
9.	flame is present.
9.	Adjust flame as
	required to proper

cooking temperature.