10
D
B
SECOND HOLE | 9 |
STEP 5.
Note: Attach only using hardware shown.
Use phillips head screws (B) and hex flange nuts (D) on second hole in leg bracket (10) to attach left long leg (9).
Do not attach hardware to first hole. This will be used for side shelf attach- ment in STEP 9.
Do not fully tighten screws at this time.
22
1
G
H
D
STEP 15.
Secure handle (22) to grill lid (1) using flat washers (G) lock washers
(H) and hex flange nuts (D).
A
STEP 6.
Place grill body (2) onto assembled
Dlegs with smoker box opening on the same side as the right short legs (8).
| Tightly secure grill body to legs using |
2 | phillips head screws (B), and hex |
| flange nuts (D). |
Attach grill body (2) to leg brackets (10) using phillips head screws (A), and hex flange nuts (D) as shown.
10 | 10 | Do not fully tighten screws at this | |
time. | |||
|
|
B
9
STEP 16a. | 5 |
| |
| D |
C |
|
1 |
|
STEP 16b. | D |
|
C
1
5
STEP 16a.
Insert warming rack support bolt (C) into hole on the left side of grill lid (1). Thread hex flange nut
(D)onto bolt and tighten. Slide warming rack (5) eyelet onto end of support bolt.
Note: Warming rack should have some play and move freely.
STEP 16b.
Slide warming rack to the far left to but up against grill lid.
On right side of grill lid (1) hold hex flange nut in place with hand and thread rack support bolt (C) through nut, guiding warming rack (5) onto sup- port bolt as shown.
7
D8
12