Coleman 9945-700 Right LEG Assembly Handle Assembly, LID Assembly, Charcoal Grate Assembly

Assembly (cont)

RIGHT LEG ASSEMBLY

HANDLE ASSEMBLY

■Tap one L-7 onto Wheel Axle. (Step 4)

Step 4		See Blister Pack for
		hardware identification.
	L-6

Wheel

Axle

■Place Lid upside down on a nonabra- sive surface to protect the finish and attach as shown. (Step 8)

See Blister Pack for hardware identification.

Step 7	H-2
	H-3
Handle	Lid
	H-1

Be careful not to overtighten.

LID ASSEMBLY

■Install Axle and hardware as shown. (Step 5) See Blister Pack for hardware identification.

Step 5 Detail 5a

Clip

A-1

L-6	A-1	Wheel
		Axle

ClipWheel

Detail 5b

Clip

■Place Lid on Base.

■Align holes in Top Hinges with holes in Bottom Hinges then secure with Bolt Hardware as shown. (Step 8)

Step 8

HH-3 HH-1

HH-2

See Blister Pack for hardware identification.

CHARCOAL GRATE ASSEMBLY

NOTE: Clip orientation is important. See Detail 5b.

■Align Right Leg with Bracket and repeat Steps 1, 2, and 3.

Step 6

Right Leg Assembled

NOTE: After Right Leg is assembled the Leg should have slight resistance in movement.

■Place Charcoal Grate in Base and rotate allowing Lever to slide through opening in Base as shown.

Step 8

Step 8a Lever

Step 9

3