Disconnecting The Gas Supply

Connection to Barbecue & Gas Supply

Always ensure that all gas controls on the appliance and on the cylinder are off before disconnecting.or removing the gas cylinder. Do not smoke or use a naked flame near the appliance or gas cylinder while connecting or disconnecting the gas line.

If installed in an enclosure, remove the gas cylinder from the enclosure before disconnecting the gas line from the appliance. Tighten all connections before placing the gas cylinder back in its enclosure.

Fixed Installation - Portable LP Gas/Propane.

Connect the gas supply line to the barbecue inlet located on the right side of the appliance using either hard plumbing, or a flexible hose connected to a bayonet point. Refer to your local installation code for pipe sizing details. Secure all joints spanner tight but do not over-tighten. Proceed to leak test.

Test gas pressure by removing the last burner from the left hand side of the barbecue and attaching a hose and pressure gauge to the end of the gas valve. Turn on 2 burners and check the pressure.

For mobile trolley installations that use flexible hosing to connect to a static propane supply, a chain or similar restraining device must be fitted to prevent strain on the gas supply line. One end of the chain should attach to the barbecue; the other end should attach to a fixed structural point close to where the hose connects to the gas piping. The chain must be at least 30% shorter than the gas supply line. In this way, if the barbecue is accidentally moved, the chain stops the barbecue from stretching the hose.

Secure All Joints And Leak Test

The gas leak testing procedure should be conducted every time a gas cylinder is refilled and reconnected to the appliance, or after any new gas connection is made. Never use a naked flame to check for gas leaks.

In a small container, mix up a solution of water and detergent or soap. Mix the solution well.

Make sure that the gas supply valve on the gas cylinder or the shut off valve on the supply line is turned on.

Make sure that the gas control valves on the appliance are all turned off.

Using a brush or spray bottle apply the solution to the gas line and each joint in the gas line, including the hose and regulator.

Bubbling of the solution will indicate that there is a leak present. Re-tighten or re-seal any joints that are leaking.

If a leak persists contact your distributor or the manufacturer for assistance.

Check Proper Burner Operation

Following operating instructions light each burner and check for a clear blue flame with just a tip of yellow. Excess yellow tipping can be adjusted using the screw on the side of the burner. Turn the screw in an anti- clockwise rotation to remove the yellow. If you are unable to achieve correct operation, consult your dealer.

Discovery Series specifications

The BeefEater Discovery Series represents a significant leap forward in outdoor cooking technology, designed to make grilling not only easier but also more enjoyable for enthusiasts and casual cooks alike. The series combines innovative design with practicality, catering to diverse grilling needs.

One of the standout features of the Discovery Series is its Advanced Cooking System. This groundbreaking technology ensures even heat distribution across the grilling surface, allowing for perfectly cooked food every time. The unique cooking surface is built to retain heat better, helping to achieve those ideal grill marks while locking in the moisture of your meats.

Another key characteristic of the Discovery Series is its robust build quality. Constructed from high-grade stainless steel, the grills are designed to withstand harsh weather conditions, making them a reliable choice for outdoor cooking year-round. The durable materials used in the Discovery Series also resist rust and corrosion, ensuring that your grill will maintain its sleek appearance and functionality over time.

This series also incorporates a range of burner configurations to suit different cooking styles. With options for both gas and charcoal grilling, users can choose their preferred method. The powerful burners provide quick heat-up times, allowing you to start cooking in no time. Additionally, the series features variable flame control, giving you the ability to adjust the heat as needed for delicate dishes or to sear steaks to perfection.

The Discovery Series includes convenient features such as integrated storage spaces and side tables, which provide ample workspace for prep and serving. Some models in the series even have additional features like built-in thermometers and utensil hooks, making your grilling experience smoother and more organized.

Ease of use is another hallmark of the Discovery Series. With push-button ignition systems and easy-to-clean surfaces, these grills are designed for hassle-free operation. The compact design of certain models makes them perfect for smaller outdoor spaces, ensuring that everyone can enjoy the benefits of a high-quality grill.

In summary, the BeefEater Discovery Series combines innovative cooking technology, robust construction, and thoughtful design features to elevate the outdoor grilling experience. Whether you are an experienced grill master or just starting your outdoor cooking journey, the Discovery Series offers a perfect blend of performance and convenience.