Thermos 465621303, 465611003 manual Hose Check

Connecting The Adapter Hose To The LP Tank (continued)

5.Hold hose end, insert nipple (A) into LP tank valve. Hand tighten coupling nut, holding connector in a straight line (B) with LP tank valve so as not to cross thread the connection.

B

Nipple must be centered into the LP tank valve.

A

Coupling nut

Position coupling nut and hose-end as shown for proper connection to LP tank valve.

6.Turn the coupling nut clockwise to tighten to a full solid stop. The hose-end will seal on the back-check feature in the LP tank valve, resulting in some resistance. An additional one-half to three quarters turn is required to complete connection. Tighten by hand only - do not use tools.

NOTE: If you cannot complete connection, disconnect hose-end and repeat steps 5 and 6. If you are still unable to complete the connection, do not use this connector!

Hose Check

Before each use, check to see if hose is cut or worn. Replace damaged hose before using grill. Use only hose specified by manufacturer.

WARNING

•Do not insert any foreign objects into the valve outlet. You may damage the valve and cause a leak. Leaking propane may result in explosion, fire, severe personal injury, or death.

•Never attempt to attach this grill to the self-contained LP gas system of a camper trailer or motor home.

Grill2Go • 17