Thermos 461240504 manual #10-24x3/8 screws DDD, 5mm lock washers EEE

7

Remove the two screws and washers from the sideburner valve bracket.

Place sideburner valve under front of sideburner control panel so that valve stem comes through large hole. Secure valve to panel using the two screws and washers you removed from the valve bracket. Press control knob onto valve stem.

First, remove screws and washers from bracket.

Sideburner valve

8

Insert sideburner into shelf, placing end of burner over sideburner valve. Valve should be in center hole of burner tube. Make sure pin on bottom of burner is in center hole in shelf bracket. Secure burner to bracket with two

#10-24x3/8” screws (DDD), 5mm lock washers (EEE),

and 5mm flat washers (FFF). See illustration below for correct burner-to-valve engagement.

Sideburner

FFF

EEE

Pin	Correct
in hole	burner-to-valve
	engagement

Valve should be in center hole in burner tube.

DDD

461240504 • 9