Char-Broil 463248708 Holes on fascia to Attach valve bracket, Holes on fascia to Attach bezel

10

First, remove the two screws and lock washers factory attached to the sideburner valve bracket. Position sideburner valve bracket beneath sideburner shelf fascia so that valve stem comes through larger center hole in fascia. Align the holes on valve bracket with left and right holes on fascia. Secure using lock washers and screws that were removed from bracket.

Next, place sideburner bezel over valve stem on front side of fascia. Align small holes on bezel with upper and lower holes on fascia. Attach using two #8-32x3/8”screws and 4mm lock washers. Press sideburner control knob onto valve stem.

Note: Use left and right

holes on fascia to

attach valve bracket

Screws and Washers removed from valve bracket

Sideburner fascia

Sideburner valve bracket

Valve stem

Install bezel with “OFF” at top.

Note: Use upper and lower

holes on fascia to

attach bezel

Control knob

#8-32x3/8” screw

4mm

lock washer

Control knob bezel

11

Insert sideburner burner into left shelf, making sure burner tube engages sideburner valve (A). Center stud on bottom of burner fits into center hole in sideburner drip pan. See illustration C for proper burner-to-valve engagement. Secure burner to drip pan using two #10-24x3/8”screws, 5mm lock washers, and 5mm flat washers. Attach long sideburner ignitor wire to sideburner electrode through the slot show (B).

B Electrode

5mm lock washer

5mm flat washer

#10-24x3/8”			Sideburner
screw
			ignitor wire
C
		Valv	e
Burner	tube

A

Sideburner burner

Air shutter

463248708 • 19