Char-Broil 463247412 manual Storing Your Grill, Cleaning the Burner Assembly

Page 9

CAUTION

SPIDER ALERT!

SPIDER AND WEBS

INSIDE BURNER TUBE

If you notice that your grill is getting hard to light or that the flame isn’t as strong as it should be, take the time to check and clean the venturi’s.

VALVE

3.

Remove carryover tubes and burners.

4.

Detach electrode from burner.

 

NOTE: Removal/Detachment method will depend on the

 

burner configuration. See different configurations in

 

illustrations below.

5.

Carefully lift each burner up and away from valve openings.

We suggest three ways to clean the burner tubes. Use the one

easiest for you.

 

(A) Bend a stiff wire (a light weight coat hanger works well)

 

into a small hook. Run the hook through each burner

 

tube several times.

 

(B) Use a narrow bottle brush with a flexible handle (do not

 

use a brass wire brush), run the brush through each

 

burner tube several times.

 

(C) Wear eye protection: Use an air hose to force air into

 

the burner tube and out the burner ports. Check each

 

port to make sure air comes out each hole.

6.

Wire brush entire outer surface of burner to remove food

 

residue and dirt.

7.

Clean any blocked ports with a stiff wire such as an open

CONTROL PANEL

SPIDER WEBS

INSIDE VENTURI

paper clip.

8. Check burner for damage, due to normal wear and corrosion

BURNER

some holes may become enlarged. If any large cracks or

holes are found replace burner.

VERY IMPORTANT: Burner tubes must reengage valve

In some areas of the country, spiders or small insects have been known to create “flashback” problems. The spiders spin webs, build nests and lay eggs in the grill’s venturi tube(s) obstructing the flow of gas to the burner. The backed-up gas can ignite in the venturi behind the control panel. This is known as a flashback and it can damage your grill and even cause injury.

openings. See illustrations at right.

9.Attach electrode to burner.

10. Carefully replace burners.

11.Attach burners to brackets on firebox.

12.Reposition carryover tubes and attach to burners. Replace flame tamers and cooking grates.

Correct

burner-to-valve

engagement

To prevent flashbacks and ensure good performance the burner and venturi assembly should be removed from the grill and cleaned before use whenever the grill has been idle for an extended period.

Storing Your Grill

• Clean cooking grates.

• Store in dry location.

• When LP cylinder is connected to grill, store outdoors in a well-

ventilated space and out of reach of children.

• Cover grill if stored outdoors. Choose from a variety of grill

covers offered by manufacturers.

• Store grill indoors ONLY if LP cylinder is turned off and

Remove screws

Firebox

be tu Carryover

Firebox

burner Electrode bracket

disconnected, removed from grill and stored outdoors.

• When removing grill from storage, follow “Cleaning the Burner

Assembly” instructions before starting grill.

Cleaning the Burner Assembly

Follow these instructions to clean and/or replace parts of burner assembly or if you have trouble igniting grill.

1.Turn gas OFF at control knobs and LP cylinder.

2.Remove cooking grates and flame tamers.

Firebox

tube

Carryover

Firebox burner bracket

Electrode

Pry off electrode with

a flat blade screwdriver

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Date Purchased Product GuideThis Grill is for Outdoor USE only Table of ContentsCalifornia Proposition Installation Safety PrecautionsLP Liquefied Petroleum Gas USE and CareLP Cylinder Filling UL listed Overfill ProtectionFor your safety UseDo not household cleaning agents. Damage to gasLP Cylinder Leak Test Leak Testing Valves, Hose and Regulator Connection, do not use this regulatorTurn all grill control knobs to OFF Ignitor Lighting For Safe Use of Your Grill and to Avoid Serious InjurySDo not lean over grill while lighting Open lid during lightingSideburner Ignitor Lighting General Grill CleaningSideburner Match Lighting Burner Flame CheckStoring Your Grill Cleaning the Burner AssemblyVery Important Burner tubes must reengage valve Turn gas OFF at control knobs and LP cylinderItems Manufacturer will not PAY for Limited WarrantyKey Qty Description Parts ListParts Diagram Assembly Non-lock casterRear 7mm flat washers on each side Upper back panel Now you may fully tighten lower screws on upper back panel Holes on fascia to Attach bezel Holes on fascia to Attach valve bracketSideburner Ignitor Wire Rear Flame tamers Warming rack Cooking grate Cylinder screw at rear of cart Emergencies Possible Cause Prevention/Solution TroubleshootingAUTO-CLEAN Section Troubleshooting Electronic IgnitionPage Warranty Registration Department Box Columbus, GA

463247412 specifications

The Char-Broil 463247412 is a standout grill that combines functionality, quality, and innovative technology, making it an excellent choice for both novice and experienced grillers. Designed for versatility and performance, this gas grill boasts several features that enhance the overall cooking experience.

One of its key characteristics is the four stainless steel burners, which deliver a total of 36,000 BTUs of cooking power. Each burner is designed to provide consistent heat across the cooking surface, ensuring that food is cooked evenly. This design allows for precise temperature control, making it easier to achieve that perfect sear on meats or gentle heating for vegetables.

The cooking surface of the Char-Broil 463247412 features a total of 425 square inches, providing ample space to prepare meals for family and friends. Additionally, it comes equipped with a 150 square inch warming rack that allows you to keep your grilled items warm while you finish cooking other dishes. The grates are made of porcelain-coated cast iron, which not only provides excellent heat retention but also makes cleaning a breeze.

One notable technology featured in this grill is the TRU-Infrared cooking system. This innovative system uses infrared heat to cook food more evenly and efficiently. The design helps reduce flare-ups, ensuring a more consistent cooking temperature and retaining the natural juices of the food. The result is juicier meat and enhanced flavors, giving your grilled dishes a restaurant-quality finish.

Furthermore, the Char-Broil 463247412 offers a convenient electronic ignition system, making it easy to start the grill with just the push of a button. This feature eliminates the need for matches or lighter fluid, providing a hassle-free grilling experience. The grill also has a built-in temperature gauge on the lid, allowing you to monitor the internal temperature without having to open the grill and lose heat.

Durability is another important aspect of this model. The grill is constructed with a sturdy stainless steel body designed to withstand the elements, ensuring longevity. The side shelves provide extra workspace and can easily hold grilling tools, seasonings, and prep items.

In summary, the Char-Broil 463247412 is an impressive gas grill that packs a range of features and technologies, from its powerful burners and TRU-Infrared cooking system to its spacious cooking area and durable construction. Whether you’re hosting a backyard barbecue or preparing a family dinner, this grill provides the performance and versatility you need to make every meal a success.
Top Page Image Contents