Char-Broil 11601578, 11601559, 11601514 manual 20x2

Page 5

5 ASSEMBLY GUIDE

GRILL CART Assembly

 

 

 

Part

Qty

.

A6Cart Bracket

1

 

A7– Wire Shelf

1

 

A8Leg End Cap

2

 

Fasteners

1/4x20-2" screw

1/4-20 Nut

(qty 4)

(qty 4)

#10x3/8" screw (qty 2)

A7

A6

A7

Place the Grill Bottom on the carton pad upside down in preparation for the next step.

Step 3 - Carefully turn the Cart Assembly over and allow it to rest on the tops of the leg assemblies. Spread the leg assemblies apart just far enough to allow the insertion of the Wire Shelf (A7) into the 4 leg holes. Assemble the Cart Bracket (A6) to the Cart Assembly by inserting 4 each 1/4-20x2" screws int0 into corresponding holes as shown. Allow the Cart Bracket to rest on the floor, this will help with alignment. Secure with 4 each, 1/4-20 nuts using a small adjustable wrench, not supplied. FINGER TIGHTEN ONLY

AT THIS POINT. The bracket will be tightened in

step B2.

Be sure to install Cart Bracket (A6) on the side shown. Once complete -leave the cart in the upside down position.

Lastly, insert the Leg End Caps (A8) into the front legs and secure with 1 each #10x3/8" screw.

A6

1/4-20x2"

screws

#10x3/8"

screws

A8

Visit www.sizzleonthegrill.com/user-forumsto chat with Patio Bistro® owners just like you!

Image 5
Contents Model Numbers Assembly GuideProvided with this grill C , AssemblyKey Grill Parts DiagramDescription Key Description Key QtyPosition and Snap into place Grill Cart AssemblyPart Qty Fasteners20x2 B1- Lower Body B2- Wind Shield B3- Grill Lid Grill Body AssemblyWhen handling the Cooking Grate Grill Final AssemblyHave sharp edges. Be very careful You should wear gloves whenController cord Behind the towel bar as shown Grill Final Assembly