Char-Broil 11601559, 11601514 Grill Body Assembly, B1- Lower Body B2- Wind Shield B3- Grill Lid

Step 3 -

6 ASSEMBLY GUIDE GRILL BODY Assembly

Part	Qty.
B1– Lower Body	1
B2– Wind Shield	1
B3– Grill Lid	1

Step 1 - Attach the Lower Body Assembly (B1) to the Cart Assembly by aligning the studs on the bottom of the grill with the corresponding holes in the tops of the leg assemblies. Secure with 7 each 10-24 nuts. A Nut Driver (not supplied) will work nicely for this step.

	Fasteners
10-24x3/8"
screw
(qty 3)	Fiber Washer	1/4-20 Nut	10-24 Nut
1/4-20x3/4"
Hinge	(qty 5)	(qty 2)	(qty 10)
screw
(qty 2)

Attach the Wind Shield (B2) to the Lower Body (B1) by aligning the holes in the panels with the corresponding holes in the Lower Body. Secure with 3 10-24 nuts, 3 10-24x3/8" Screws, and 3 fiber washers. The Wind Shield will rest inside the Lower

Body.

10-24		10-24x3/8"
	B2	Screws
Nuts		(3 each)

Studs
located on
Lower
Body
Assembly	B1

(3 each)

Fiber

B1

Cart

Bracket

B1

Step 2 - With the legs assembled to the Lower

Body, tighten the 4 screws holding the Cart

Bracket in place. Once complete, turn the grill over

to the upright position.

Washer

(3 each)

Step 4 - Attach the Grill Lid (B3) by aligning the hinge holes in the lid to the matching holes in the Wind Shield (B2). Insert 2 Hinge Screws into the holes and secure with 2 1/4-20 nuts and two Fiber washers from the inside of the grill.

1/4-20x3/4"

B3	Hinge
	Screws
	(2 each)

Fiber

Washer

(2 each)

1/4-20

Nuts

(2 each)

Visit www.sizzleonthegrill.com/user-forumsto chat with Patio Bistro® owners just like you!