United States Stove 9947 Removing Front Screen, Log Assembly, Log Positioning, Log Set Assembly

Models: 9947

1 28
Download 28 pages 17.95 Kb
Page 11
Image 11
REMOVING FRONT SCREEN

REMOVING FRONT SCREEN

REMOVING FRONT SCREEN: 1) Remove screw from the top of the screen (Fig. 8A). 2) Tilt the top of

the screen toward you slightly and lift the screen up out of the screen retainer (Fig. 8B). NOTE: To reinstall the front screen, reverse steps 1 & 2.

FIG. 8A

FIG. 8B

LOG ASSEMBLY

LOG POSITIONING

Do not handle these logs with your bare hands! Always wear gloves to prevent skin irritation from ceramic fibers. After handling logs, wash your hands gently with soap and water to remove any traces of fibers.

PROPER INSTALLATION SEQUENCE:

WARNING: Failure to position the parts in accordance with these diagrams or failure to use only parts specifically approved with this heater may result in property damage or personal injury.

FIGURE 9. Log Set Assembly

WARNING

The positioning of the logs is critical to the safe and clean operation of this heater. Sooting and other problems may result if the logs are not properly and firmly situated in the appliance. Never add additional logs or embellishments such as pine cones,vermiculite or rock wool to the heater.

11

Page 11
Image 11
United States Stove 9947 Removing Front Screen, Log Assembly, Log Positioning, Proper Installation Sequence