Char-Broil 10301569 manual Assembly

Page 8

ASSEMBLY

•Open carton and place contents onto a clean floor.

1• Place bottom on ground with clean out door opening facing ground.

•Attach rear panel to the bottom with (3) 1/4-20x1/2” hex screws.

2	• With lower section still in position from previous step, attach (1) short leg to the right end and (1)
	Long leg to left end of the bottom assembly using (3) 1/4-20x1/2” long hex screws from
	Outside and flange nuts on inside.

Short Leg

Long Leg

8

Image 8

Contents Tools needed for assembly Estimated Assembly Time 1 HourCarbon Monoxide Hazard This Unit is HEAVY! do not attempt toTable of Contents Wash your hands after handling this productGrill Maintenance GrillingCooking Tips Heat of the CoalsDirect and Indirect Grilling Vegetables MesquiteLimited Warranty Items Manufacturer will not PAY forParts List Key Qty DescriptionAssembly This may require at least two people Assembly using 4 1/4-20x1/2 hex screws Lock Washer Flat Washer Nut Latch Handle 1011 Your Santa FE Grill is now ready for use Hardware List Page Warranty Registration Department Box Columbus, GA