Char-Broil 10301569 manual This may require at least two people

Page 9

This may require at least two people

3

Attach (1) short leg and (1) long leg to front of bottom assembly using (3) 1/4-

 

20x1/2" hex screws from outside and flange nuts from the inside.

 

 

Assemble the wood rack to the legs using (4) 1/4-20x ½" hex screws and

 

 

flanges nuts as shown in Figure A

.

A

• Insert a cotter pin through the hole in one end of the axle and bend it so it won’t back out (A).

4 Slide a wheel onto the axle. Slide axle through hole in bottom of short leg as shown. Slide the other wheel onto the end of the axle. Insert the remaining cotter pin through the hole in the axle. Make sure all hardware is tight.

Axle

A

Cotter pin

Cotter Pin Axle

9

Image 9
Contents Estimated Assembly Time 1 Hour Tools needed for assemblyCarbon Monoxide Hazard This Unit is HEAVY! do not attempt toWash your hands after handling this product Table of ContentsGrilling Grill MaintenanceHeat of the Coals Cooking TipsVegetables Mesquite Direct and Indirect GrillingItems Manufacturer will not PAY for Limited WarrantyKey Qty Description Parts ListAssembly This may require at least two people Assembly using 4 1/4-20x1/2 hex screws Lock Washer Flat Washer Nut Latch Handle 1011 Your Santa FE Grill is now ready for use Hardware List Page Warranty Registration Department Box Columbus, GA