Monogram.™
ZGG48N31CSS - GE Monogram 48" Outdoor Cooking Center
Dimensions and Specifications (in inches)
|
| If Installing |
|
| an Electrical |
|
| Outlet for |
|
| the Rotisserie |
|
| Motor, Mount |
|
| on Right Side |
|
| (6.5 AMP Min.) |
3" Min. for Lid | ||
Clearance |
|
|
|
| |
| ||
|
| |
| 4x4 Opening | |
for Gas Supply | ||
| Line | |
| Opening | |
|
| for Access |
|
| Doors |
|
| If Installing |
|
| an Electrical |
|
| Outlet for |
|
| the Rotisserie |
|
| Motor, Mount |
|
| on Right Side |
|
| (6.5 AMP Min.) |
3" Min. for Lid | ||
Clearance |
|
|
|
| |
|
| |
| 4x4 Opening | |
for Gas Supply | ||
| Line | |
| Opening | |
|
| for Access |
|
| Doors |
Installation in a combustible enclosure.
ZX48JYSS insulated jacket is required.
•Combustible enclosures require insulated jackets.
ZX36JYSS for 36” models and ZX48JYSS for 48” models. The insulated jacket must be supported from the bottom by a solid deck or ledge on each side beneath the jacket.
•Construct the enclosure as shown and place the insulated jacket into the enclosure. Place the cooking center into the jacket. No installation hardware is required.
Specification Revised 9/00
Installation in a
•In a
Clearances - All Models
•Allow 3” at the rear for lid clearance.
•Allow at least 12” clearance at the back of the grill when exhaust is directed to a window or a surface that is difficult to clean.
•Allow at least 6” clearance on each side to any
•Allow at least 12” clearance on each side to combustible vertical materials.
For answers to your Monogram,®
GE Profile Performance Series,™
GE Profile™ or GE appliance questions, call
GE Answer Center® service, 800.626.2000.
Listed by
Underwriters
RLaboratories