Transporting a Full Cylinder

The L.P. gas cylinder must have a shut-off valve terminating in a Type 1 L.P. gas- cylinder-valve outlet. A Type 1 compatible cylinder with a Type 1 cylinder valve has a positive seating connection that does not permit gas flow until a positive seal has been obtained.

The cylinder must be arranged for vapor withdrawal. It must also include a collar to protect the cylinder valve. A safety-relief device having direct communication with the vapor space of cylinder must be pro- vided. This will expel high-pressure gas if the cylinder is overfilled or overheated.

All L.P. gas cylinders used with this appli- ance shall be constructed and marked in accordance with the specifications for L.P. gas cylinders of the U.S. Department of Transportation (DOT) or the National Stan- dard of Canada, CAN/CSA-B339, Cylin- ders, Spheres and Tubes for Transporta- tion of Dangerous Goods; and Commis- sion, as applicable; and shall be provided with a listed overfilling-prevention device. Read labels on the L.P. gas-supply cylin- der.

DANGER: Do not insert any foreign ob- jects into the valve outlet. You may dam- age the back check. A damaged back check can cause a leak, which could result in explosion, fire, severe personal injury or death.

Allow only a qualified L.P. gas dealer to fill or repair an L.P. gas-supply cylinder.

Inform the gas dealer if it is a new or used cylinder to be filled. Caution the gas dealer not to overfill the fuel cylinder.

After filling, have the gas dealer check for leaks and that the relief valve remains free to function.

Have the gas dealer weigh the cylinder after filling to ensure that the cylinder is not over- filled.

DANGER:

a.) Do not store a spare L.P. gas cylinder under or near this appliance.

b.) Never fill the gas cylinder beyond 80 per- cent full.

c.) If the information in (a.) and (b.) is not followed exactly, a fire causing serious injury or death may occur.

WARNING: Handle a full cylinder with care. Gas is under high pressure.

You should transport only one cylinder at a time. Transport the cylinder in an upright and secure manner with the control valve turned off and the POL dust cap in place.

Do not transport a cylinder in the passenger compartment of a vehicle.

Do not leave cylinder in direct sunlight or in

ahigh-heat area such as a closed car trunk. High-heat areas could cause the relief valve to vent gas.

Use a cylinder cap on the cylinder-valve out- let during transport and when the cylinder is not connected to the grill. Keep cylinder valve closed when not in use.