Basic Parts of the Built-in and Portable models
bottle well
two piece
sliding cover
Side shelves not shown
Tools needed:
Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed.
•Level
•Phillips screwdriver
•tape measure or ruler
•slip joint pliers
•pipe wrench
•adjustable wrench
Parts needed:
bottle well
holder
single faucet
outlet hose and
connectors sink
inlet hose and
connectors
support
frame
ice bin
1"
drain fitting
bottle
• |
bottle
rail
• 1" drain system |
• NSF- or |
• plumbers putty |
• clear silicon |
drain fitting
water filter connection
and filter
towel
holder
opener
bottle cap catch pan
Installation -
Built-in model
WARNING
Excessive Weight Hazard
Use two or more people to move and install bar cart.
Failure to do so can result in back or other injury.
Use a certified plumber to connect and install potable water supply and drain system to outdoor bar cart per local code requirements.
1. Set the Bar Cart on a protective surface such as cardboard or a blanket.
2. Make sure you have the drain connections, in accordance with local codes, under the Bar Cart.
3. Remove the bottle rail, bottle cap catch pan and water filter from the ice bin.
4. Remove the faucet from the sink.
sink
washer 
locknut
5. Install the faucet and fasten securely.
6. Install the water filter on the sink/faucet side of the cutout. Position the filter so that the plastic hose attached to the filter easily reaches the faucet connection.
plastic hose | nut |
|
| inlet | ||||
connector |
|
|
|
| ||||
|
|
|
|
|
| connector | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
mounting
7. panel Install water inlet connection in a
convenient location under the cutout. Position the water inlet connection so that the plastic hose easily reaches the filter inlet connection.
plumbers putty
8. Place a small amount of plumbers putty around both the ice bin and sink drain mounting seats.
3