Majestic Appliances ODSHR42 manual Common Materials and Factors, Installing Line for Gas Logs

ODSHR Series

COMMON MATERIALS AND FACTORS

MATERIAL	K*	R	MINIMUM
			THICKNESS

EH2416	0.50 in.**
(Majestic Products 0.458 1.09
Company)
Common Brick 5.0 0.10	5.46 in.**

R Value is for ¹⁄₂ inch.

*Units of K = BTU/SQ FT/HR/˚F/IN

**Thickness of Listed Material

FP533ADD

Fig. 25 Hearth extension material factors.

					Seal Cracks Between
Noncombustible					Fireplace and Hearth
					Extension with
Decorative Covering
					Noncombustible
May be Installed
					Material
or
.018" Minimum
Sheet Metal
	2¹⁄₂" Min.				Lower		Fireplace
					Surround
Combustible							Hearth
Floor
Min. Thickness
(Refer to Table 4)							Majestic Safety
							Strips Must be
		Minimum Insulation					Overlapped 1/2"
		Value R-3.28					Min.
		(Refer Table 4)					FP1169
	Seal Cracks Between Fireplace
	and Hearth Extension with
	Noncombustible Material
				Lower
8" Max.				Surround
			Cement
Thickness							Fireplace
			Blocks
Combustible							Hearth
Floor
	1/4" Min.					Majestic Safety
	Thickness
						Strips Must be

Minimum Insulation	Overlapped 1/2"
Value R-0.94
	Min.
	FP1170

Fig. 26 Protection of adjacent combustible side walls and hearth extension dimensions.

Wall Covering

2 x 4 Header -

Do Not Notch at

Ledge Brackets

Fig. 18

Hearth Extension

Hearth

Extension Insulation

Molding used to Fasten Hearth Extension

in Place

Majestic Safety Strips Must	Seal Crack Between
be Overlapped 1/2" Min.	Fireplace and Hearth
	Extension with
FP1171	Noncombustible Material
Fig. 27 Sealing detail.
Wall Covering		2 x 4 Header - Do
Noncombustible		Not Notch at
Decorative Facing		Ledge Brackets
Seal All Cracks
Between Fireplace
Surround and Wall
Materials with
Noncombustible
Material
Noncombustible	Fig. 19
Decorative
Covering
Hearth
Extension
	Seal Crack Between
Majestic Safety Strips
	Fireplace and Hearth
Must be Overlapped 1/2"
	Extension with Noncom-
Min.
	bustible Material
			FP1172

Fig. 28 Sealing detail.

■9. Installing Line for Gas Logs

Vermont Castings, Majestic Products fireplaces are designed to accept a 1/2 inch gas line for installation of an approved gas appliance. (Vermont Castings, Majestic Products manufactures a wide variety of gas logs for use in Vermont Castings, Majestic Products fireplaces.)

Be sure to have the appliance installed in accordance with building codes.

Gas connection may enter from either left or right side of the fireplace.

Locate appropriate gas line in the outer casing of fireplace and remove insulation from gas line tube. (Fig. 29)

16 20002264