LIGHTING INSTRUCTIONS
Open lid.
Ensuring burner controls are in | IGNITER |
the off position, turn on the gas |
|
supply valve. |
|
|
| LIGHTING PORT |
|
| HOLE |
LEFT BURNER | REAR | (BOTH SIDES) |
RIGHT BURNER | ||
PAIR | BURNER | PAIR |
Back Burner Lighting |
| Main Burner Lighting | ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Side Burner Lighting
(optional)
Remove warming
rack.
Turn back burner
control to high position.
Press and hold igniter button until lit, or light by match.
If ignition is not immedi- ate, turn the burner control off. Wait 5 minutes.
Turn the left burner of
either burner pair to high.
Press and hold igniter
button until burner lights, or light by inserting a lit match through the corresponding side lighting port.
If ignition is not immedi- ate, turn the burner control off. Wait 5 minutes.
With the left burner
operating on high, turn the right burner of the same pair to high.
Open burner cover.
Turn side burner
control to high
position.
Turn igniter knob clockwise several times, or light by match.
If ignition is not
immediate, turn the
burner control off.
Wait 5 minutes.
6
To light the other
burner pair, repeat the
procedure.
The propane cylinder is equipped with an excess flow device. Unless all burners are turned off prior to turning the cylinder on, only small flames will be achievable.
Do not use back burner while operating any of the main burners.