ASSEMBLY INSTRUCTIONS
CAUTION: During unpacking and assembly it is recommended that you wear work gloves and safety glasses for your protection. Although we make every effort to make the assembly process as problem free and safe as possible, it is characteristic of fabricated steel parts that the edges and corners may be sharp and can cause cuts if handled incorrectly during assembly.
GETTING STARTED
1.Remove all cart panels, hardware, and grill head from carton. Raise lid and remove any components packed inside. Use the parts list to ensure all necessary parts are included.
2.Do not destroy packaging until grill has been fully assembled and operating to your satisfaction.
3.Assemble BBQ where it is to be used, lay down cardboard or a towel to protect parts from being lost or damaged while assembling.
4.Most stainless steel parts are supplied with a protective plastic coating that must be removed prior to using grill.
5.Follow all instructions in the order that they are layed out in this manual.
6.Two people are required to lift the grill head onto the assembled cart.
TOOLS REQUIRED FOR ASSEMBLY (tools not included)
3/8 (10mm)
WRENCH OR RATCHET
3/8
7/16 WRENCH OR RATCHET
7/16
FLAT AND PHILIPS | HAMMER |
SCREWDRIVERS |
|
If you have any questions about assembly or grill operation, or if there are damaged or missing parts please call our customer service department at 1-
12