LIGHTING INSTRUCTIONS
Open lid.
Ensuring all burner controls
are in the off position, slowly turn on the gas supply valve.
LIGHTING HOLE |
|
|
| |
|
|
|
| RIGHT |
LEFT |
| CENTER | REAR | BURNER |
BURNER | IGNITOR | BURNER |
| |
BURNER |
| |||
|
| |||
Main Burner
Lighting
Turn left burner control to high position.
Press and hold
igniter button until lit, or light by match.
If ignition is not immediate, turn burner control off. Wait 5 minutes.
With left burner
operating on high, turn the centre and/or right burner to high.
Rear Burner
Lighting
Remove
warming rack.
Turn rear
burner control
to high position.
Press and hold
igniter button until lit, or light by match.
If ignition is not immediate, turn burner control off. Wait 5 minutes.
Side Burner
Lighting
(optional)
Open burner
cover.
Turn side
burner control
to high position.
Turn igniter knob
clockwise
several times or light by match.
If ignition is not immediate, turn burner control off. Wait 5 minutes.
The propane cylinder is equipped with an excess flow device. Unless all burners are turned off prior to turning the cylinder on, only small flames and low heat will be achievable.
Do not use back burner while operating main burner.
6