Heat & Glo LifeStyle DAKOTA 42H owner manual Glass Assembly, Grilles and Trim, Glass Specifications

Page 17

F. Glass Assembly

WARNING

Handle glass with care.

Inspect the gasket to ensure it is undamaged.

Inspect the glass for cracks, chips or scratches.

Do NOT strike, slam or scratch glass.

Do NOT operate appliance with glass door removed, cracked, broken or scratched.

Replace glass door assembly as a complete appliance.

The glass doors are included with and pre-installed in the appliance.

To adjust doors, open them and loosen screws on top and bottom pivot pins. Slide each door as necessary and tighten screws.

To adjust handle, loosen screws to move handles as necessary and tighten screws.

Glass Specifications

Dakota42: Tempered

Dakota42L: Tempered

Dakota42H: Tempered

Dakota42HL: Tempered

G. Grilles and Trim

Install optional marble and brass trim surround kits as de- sired. Marble, brass, brick, tile, or other non-combustible materials can be used to cover up the gap between the non- combustible facing and the appliance.

Do not obstruct or modify the air inlet/outlet grilles.

Heat-N-Glo Lifestyle Collection • Dakota 42/Dakota 42H • 4036-905 Rev I • 10/05

17

Image 17
Contents What to do if you smell gas Models Dakota Dakota 42HListing Label Information/Location Homeowner Reference InformationTable of Contents Listing and Code Approvals High Altitude InstallationsAppliance Certification Glass SpecificationsGetting Started Design and Installation ConsiderationsInspect Appliance and Components Tools and Supplies NeededFire Risk Framing and ClearancesSelect Appliance Location Fire Risk Odor Risk ClearancesMantel Projections FP = Fireplace Opening X = AIR Supply Inlet Securing and Leveling Appliance Appliance PreparationRemove Logs, Ember Bed and Shipping Cover Fuel Conversion Gas Connection Gas InformationGas Pressure Fire Risk Explosion RiskFire Risk Explosion Risk Asphyxiation Risk Loosen Refractory Retaining Strip Valve AccessElectrical Information Recommendation for WireCSA C22.1 Shock Risk Explosion RiskFacing Material FinishingClean the Appliance Appliance SetupAccessories Remove the Shipping MaterialsRear Log Positioning the LogsGlass Specifications Glass AssemblyGrilles and Trim Before Lighting Appliance Operating InstructionsBefore operating this appliance, have a qualified technician Fire Risk Burn RiskIntellifire Ignition Lighting the ApplianceInitial Break-in Procedure Frequently Asked QuestionsFire Risk High Temperatures Issue SolutionsIntellifire Ignition System TroubleshootingSymptom Possible Causes Corrective Actions Maintaining and Servicing the Appliance Tools Required Valve Service and ReplacementOrifice Tube Pilot Tube Inspect Maintenance Tasks Maintenance and Service TasksReference Materials Appliance Dimension DiagramThis page intentionally left blank This page intentionally left blank This page intentionally left blank This page intentionally left blank Warranty Warranty for HEAT-N-GLO FireplacesContact Information